Conditional Compilation

Conditional compilation is the process of selecting which code to compile and which code to not compile.

ConditionalDeclaration:
    Condition DeclarationBlock
    Condition DeclarationBlock else DeclarationBlock
    Condition : DeclDefsopt
    Condition DeclarationBlock else : DeclDefsopt

ConditionalStatement:
    Condition NoScopeNonEmptyStatement
    Condition NoScopeNonEmptyStatement else NoScopeNonEmptyStatement

If the Condition is satisfied, then the following DeclarationBlock or Statement is compiled in. If it is not satisfied, the DeclarationBlock or Statement after the optional else is compiled in.

Any DeclarationBlock or Statement that is not compiled in still must be syntactically correct.

No new scope is introduced, even if the DeclarationBlock or Statement is enclosed by { }.

ConditionalDeclarations and ConditionalStatements can be nested.

The StaticAssert can be used to issue errors at compilation time for branches of the conditional compilation that are errors.

Condition comes in the following forms:

Condition:
    VersionCondition
    DebugCondition
    StaticIfCondition

Version Condition

VersionCondition:
    version ( IntegerLiteral )
    version ( Identifier )
    version ( unittest )
    version ( assert )

Versions enable multiple versions of a module to be implemented with a single source file.

The VersionCondition is satisfied if the IntegerLiteral is greater than or equal to the current version level, or if Identifier matches a version identifier.

The version level and version identifier can be set on the command line by the -version switch or in the module itself with a VersionSpecification, or they can be predefined by the compiler.

Version identifiers are in their own unique name space, they do not conflict with debug identifiers or other symbols in the module. Version identifiers defined in one module have no influence over other imported modules.

int k;
version (Demo) // compile in this code block for the demo version
{
    int i;
    int k;    // error, k already defined

    i = 3;
}
x = i;      // uses the i declared above

version (X86)
{
    ... // implement custom inline assembler version
}
else
{
    ... // use default, but slow, version
}

The version(unittest) is satisfied if and only if the code is compiled with unit tests enabled (the -unittest option on dmd).

Version Specification

VersionSpecification:
    version = Identifier ;
    version = IntegerLiteral ;

The version specification makes it straightforward to group a set of features under one major version, for example:

version (ProfessionalEdition)
{
    version = FeatureA;
    version = FeatureB;
    version = FeatureC;
}
version (HomeEdition)
{
    version = FeatureA;
}
...
version (FeatureB)
{
    ... implement Feature B ...
}

Version identifiers or levels may not be forward referenced:

version (Foo)
{
    int x;
}
version = Foo;  // error, Foo already used

VersionSpecifications may only appear at module scope.

While the debug and version conditions superficially behave the same, they are intended for very different purposes. Debug statements are for adding debug code that is removed for the release version. Version statements are to aid in portability and multiple release versions.

Here's an example of a full version as opposed to a demo version:

class Foo
{
    int a, b;

    version(full)
    {
        int extrafunctionality()
        {
            ...
            return 1;  // extra functionality is supported
        }
    }
    else // demo
    {
        int extrafunctionality()
        {
            return 0;  // extra functionality is not supported
        }
    }
}

Various different version builds can be built with a parameter to version:

version(n) // add in version code if version level is >= n
{
    ... version code ...
}

version(identifier) // add in version code if version
                         // keyword is identifier
{
    ... version code ...
}

These are presumably set by the command line as -version=n and -version=identifier.

Predefined Versions

Several environmental version identifiers and identifier name spaces are predefined for consistent usage. Version identifiers do not conflict with other identifiers in the code, they are in a separate name space. Predefined version identifiers are global, i.e. they apply to all modules being compiled and imported.

Predefined Version Identifiers

Version Identifier	Description
DigitalMars	DMD (Digital Mars D) is the compiler
GNU	GDC (GNU D Compiler) is the compiler
LDC	LDC (LLVM D Compiler) is the compiler
SDC	SDC (Stupid D Compiler) is the compiler
Windows	Microsoft Windows systems
Win32	Microsoft 32-bit Windows systems
Win64	Microsoft 64-bit Windows systems
linux	All Linux systems
OSX	Mac OS X
FreeBSD	FreeBSD
OpenBSD	OpenBSD
NetBSD	NetBSD
DragonFlyBSD	DragonFlyBSD
BSD	All other BSDs
Solaris	Solaris
Posix	All POSIX systems (includes Linux, FreeBSD, OS X, Solaris, etc.)
AIX	IBM Advanced Interactive eXecutive OS
Haiku	The Haiku operating system
SkyOS	The SkyOS operating system
SysV3	System V Release 3
SysV4	System V Release 4
Hurd	GNU Hurd
Android	The Android platform
Emscripten	The Emscripten platform
PlayStation	The PlayStation platform
PlayStation4	The PlayStation 4 platform
Cygwin	The Cygwin environment
MinGW	The MinGW environment
FreeStanding	An environment without an operating system (such as Bare-metal targets)
CRuntime_Bionic	Bionic C runtime
CRuntime_DigitalMars	DigitalMars C runtime
CRuntime_Glibc	Glibc C runtime
CRuntime_Microsoft	Microsoft C runtime
CRuntime_Musl	musl C runtime
CRuntime_UClibc	uClibc C runtime
X86	Intel and AMD 32-bit processors
X86_64	Intel and AMD 64-bit processors
ARM	The ARM architecture (32-bit) (AArch32 et al)
ARM_Thumb	ARM in any Thumb mode
ARM_SoftFloat	The ARM soft floating point ABI
ARM_SoftFP	The ARM softfp floating point ABI
ARM_HardFloat	The ARM hardfp floating point ABI
AArch64	The Advanced RISC Machine architecture (64-bit)
AsmJS	The asm.js intermediate programming language
Epiphany	The Epiphany architecture
PPC	The PowerPC architecture, 32-bit
PPC_SoftFloat	The PowerPC soft float ABI
PPC_HardFloat	The PowerPC hard float ABI
PPC64	The PowerPC architecture, 64-bit
IA64	The Itanium architecture (64-bit)
MIPS32	The MIPS architecture, 32-bit
MIPS64	The MIPS architecture, 64-bit
MIPS_O32	The MIPS O32 ABI
MIPS_N32	The MIPS N32 ABI
MIPS_O64	The MIPS O64 ABI
MIPS_N64	The MIPS N64 ABI
MIPS_EABI	The MIPS EABI
MIPS_SoftFloat	The MIPS soft-float ABI
MIPS_HardFloat	The MIPS hard-float ABI
NVPTX	The Nvidia Parallel Thread Execution (PTX) architecture, 32-bit
NVPTX64	The Nvidia Parallel Thread Execution (PTX) architecture, 64-bit
RISCV32	The RISC-V architecture, 32-bit
RISCV64	The RISC-V architecture, 64-bit
SPARC	The SPARC architecture, 32-bit
SPARC_V8Plus	The SPARC v8+ ABI
SPARC_SoftFloat	The SPARC soft float ABI
SPARC_HardFloat	The SPARC hard float ABI
SPARC64	The SPARC architecture, 64-bit
S390	The System/390 architecture, 32-bit
SystemZ	The System Z architecture, 64-bit
HPPA	The HP PA-RISC architecture, 32-bit
HPPA64	The HP PA-RISC architecture, 64-bit
SH	The SuperH architecture, 32-bit
WebAssembly	The WebAssembly virtual ISA (instruction set architecture), 32-bit
Alpha	The Alpha architecture
Alpha_SoftFloat	The Alpha soft float ABI
Alpha_HardFloat	The Alpha hard float ABI
LittleEndian	Byte order, least significant first
BigEndian	Byte order, most significant first
ELFv1	The Executable and Linkable Format v1
ELFv2	The Executable and Linkable Format v2
D_BetterC	D as Better C code (command line switch -betterC) is being generated
D_Coverage	Code coverage analysis instrumentation (command line switch -cov) is being generated
D_Ddoc	Ddoc documentation (command line switch -D) is being generated
D_InlineAsm_X86	Inline assembler for X86 is implemented
D_InlineAsm_X86_64	Inline assembler for X86-64 is implemented
D_LP64	Pointers are 64 bits (command line switch -m64). (Do not confuse this with C's LP64 model)
D_X32	Pointers are 32 bits, but words are still 64 bits (x32 ABI) (This can be defined in parallel to X86_64)
D_HardFloat	The target hardware has a floating point unit
D_SoftFloat	The target hardware does not have a floating point unit
D_PIC	Position Independent Code (command line switch -fPIC) is being generated
D_SIMD	Vector extensions (via __simd) are supported
D_AVX	AVX Vector instructions are supported
D_AVX2	AVX2 Vector instructions are supported
D_Version2	This is a D version 2 compiler
D_NoBoundsChecks	Array bounds checks are disabled (command line switch -boundscheck=off)
D_ObjectiveC	The target supports interfacing with Objective-C
Core	Defined when building the standard runtime
Std	Define when building the standard library
unittest	Unit tests are enabled (command line switch -unittest)
assert	Checks are being emitted for AssertExpressions
none	Never defined; used to just disable a section of code
all	Always defined; used as the opposite of none

The following identifiers are defined, but are deprecated:

Predefined Version Identifiers (deprecated)

Version Identifier	Description
darwin	The Darwin operating system; use OSX instead
Thumb	ARM in Thumb mode; use ARM_Thumb instead
S390X	The System/390X architecture	64-bit; use SystemZ instead

Others will be added as they make sense and new implementations appear.

It is inevitable that the D language will evolve over time. Therefore, the version identifier namespace beginning with "D_" is reserved for identifiers indicating D language specification or new feature conformance. Further, all identifiers derived from the ones listed above by appending any character(s) are reserved. This means that e.g. ARM_foo and Windows_bar are reserved while foo_ARM and bar_Windows are not.

Furthermore, predefined version identifiers from this list cannot be set from the command line or from version statements. (This prevents things like both Windows and linux being simultaneously set.)

Compiler vendor specific versions can be predefined if the trademarked vendor identifier prefixes it, as in:

version(DigitalMars_funky_extension)
{
    ...
}

It is important to use the right version identifier for the right purpose. For example, use the vendor identifier when using a vendor specific feature. Use the operating system identifier when using an operating system specific feature, etc.

Debug Condition

DebugCondition:
    debug
    debug ( IntegerLiteral )
    debug ( Identifier )

Two versions of programs are commonly built, a release build and a debug build. The debug build includes extra error checking code, test harnesses, pretty-printing code, etc. The debug statement conditionally compiles in its statement body. It is D's way of what in C is done with #ifdef DEBUG / #endif pairs.

The debug condition is satisfied when the -debug switch is passed to the compiler or when the debug level is >= 1.

The debug ( IntegerLiteral ) condition is satisfied when the debug level is >= IntegerLiteral.

The debug ( Identifier ) condition is satisfied when the debug identifier matches Identifier.

class Foo
{
    int a, b;
debug:
    int flag;
}

Debug Statement

A ConditionalStatement that has a DebugCondition is called a DebugStatement. DebugStatements have relaxed semantic checks in that pure, @nogc, nothrow and @safe checks are not done. Neither do DebugStatements influence the inference of pure, @nogc, nothrow and @safe attributes.

Debug Specification

DebugSpecification:
    debug = Identifier ;
    debug = IntegerLiteral ;

Debug identifiers and levels are set either by the command line switch -debug or by a DebugSpecification.

Debug specifications only affect the module they appear in, they do not affect any imported modules. Debug identifiers are in their own namespace, independent from version identifiers and other symbols.

It is illegal to forward reference a debug specification:

debug(foo) writeln("Foo");
debug = foo;    // error, foo used before set

DebugSpecifications may only appear at module scope.

Various different debug builds can be built with a parameter to debug:

debug(IntegerLiteral) { } // add in debug code if debug level is >= IntegerLiteral
debug(identifier) { } // add in debug code if debug keyword is identifier

These are presumably set by the command line as -debug=n and -debug=identifier.

Static If Condition

StaticIfCondition:
    static if ( AssignExpression )

AssignExpression is implicitly converted to a boolean type, and is evaluated at compile time. The condition is satisfied if it evaluates to true. It is not satisfied if it evaluates to false.

It is an error if AssignExpression cannot be implicitly converted to a boolean type or if it cannot be evaluated at compile time.

StaticIfConditions can appear in module, class, template, struct, union, or function scope. In function scope, the symbols referred to in the AssignExpression can be any that can normally be referenced by an expression at that point.

const int i = 3;
int j = 4;

static if (i == 3)    // ok, at module scope
    int x;

class C
{
    const int k = 5;

    static if (i == 3) // ok
        int x;
    else
        long x;

    static if (j == 3) // error, j is not a constant
        int y;

    static if (k == 5) // ok, k is in current scope
        int z;
}

template INT(int i)
{
    static if (i == 32)
        alias INT = int;
    else static if (i == 16)
        alias INT = short;
    else
        static assert(0); // not supported
}

INT!(32) a;  // a is an int
INT!(16) b;  // b is a short
INT!(17) c;  // error, static assert trips

A StaticIfConditional condition differs from an IfStatement in the following ways:

1. It can be used to conditionally compile declarations, not just statements.
2. It does not introduce a new scope even if { } are used for conditionally compiled statements.
3. For unsatisfied conditions, the conditionally compiled code need only be syntactically correct. It does not have to be semantically correct.
4. It must be evaluatable at compile time.

Static Foreach

StaticForeach:
    static AggregateForeach
    static RangeForeach

StaticForeachDeclaration:
    StaticForeach DeclarationBlock
    StaticForeach : DeclDefsopt

StaticForeachStatement:
    StaticForeach NoScopeNonEmptyStatement

The aggregate/range bounds are evaluated at compile time and turned into a sequence of compile-time entities by evaluating corresponding code with a ForeachStatement/ForeachRangeStatement at compile time. The body of the static foreach is then copied a number of times that corresponds to the number of elements of the sequence. Within the i-th copy, the name of the static foreach variable is bound to the i-th entry of the sequence, either as an enum variable declaration (for constants) or an alias declaration (for symbols). (In particular, static foreach variables are never runtime variables.)

static foreach(i; [0, 1, 2, 3])
{
    pragma(msg, i);
}

static foreach supports multiple variables in cases where the corresponding foreach statement supports them. (In this case, static foreach generates a compile-time sequence of tuples, and the tuples are subsequently unpacked during iteration.)

static foreach(i, v; ['a', 'b', 'c', 'd'])
{
    static assert(i + 'a' == v);
}

Like bodies of ConditionalDeclarations, a static foreach body does not introduce a new scope. Therefore, it can be used to generate declarations:

import std.range : iota;
import std.algorithm : map;
import std.conv : text;
static foreach(i; iota(0, 3).map!text)
{
    mixin(`enum x` ~ i ~ ` = i;`);
}

pragma(msg, x0, " ", x1," ", x2); // 0 1 2

As static foreach is a code generation construct and not a loop, break and continue cannot be used to change control flow within it. Instead of breaking or continuing a suitable enclosing statement, such an usage yields an error (this is to prevent misunderstandings).

int test(int x)
{
    int r = -1;
    switch(x)
    {
        static foreach(i; 0 .. 100)
        {
            case i:
                r = i;
                break; // error
        }
        default: break;
    }
    return r;
}

static foreach(i; 0 .. 200)
{
    static assert(test(i) == (i<100 ? i : -1));
}

An explicit break/continue label can be used to avoid this limitation. (Note that static foreach itself cannot be broken nor continued even if it is explicitly labeled.)

int test(int x)
{
    int r = -1;
    Lswitch: switch(x)
    {
        static foreach(i; 0 .. 100)
        {
            case i:
                r = i;
                break Lswitch;
        }
        default: break;
    }
    return r;
}

static foreach(i; 0 .. 200)
{
    static assert(test(i) == (i<100 ? i : -1));
}

Static Assert

StaticAssert:
    static assert ( AssignExpression ,opt );
    static assert ( AssignExpression , AssignExpression ,opt );

AssignExpression is evaluated at compile time, and converted to a boolean value. If the value is true, the static assert is ignored. If the value is false, an error diagnostic is issued and the compile fails.

Unlike AssertExpressions, StaticAsserts are always checked and evaluted by the compiler unless they appear in an unsatisfied conditional.

void foo()
{
    if (0)
    {
        assert(0);  // never trips
        static assert(0); // always trips
    }
    version (BAR)
    {
    }
    else
    {
        static assert(0); // trips when version BAR is not defined
    }
}

StaticAssert is useful tool for drawing attention to conditional configurations not supported in the code.

The optional second AssignExpression can be used to supply additional information, such as a text string, that will be printed out along with the error diagnostic.