std.range

auto retro(Range)(Range r)
if (isBidirectionalRange!(Unqual!Range));

Iterates a bidirectional range backwards. The original range can be accessed by using the source property. Applying retro twice to the same range yields the original range.

Parameters:

Range r

the bidirectional range to iterate backwards

Returns:

A bidirectional range with length if r also provides a length. Or, if r is a random access range, then the return value will be random access as well.

See Also:

std.algorithm.mutation.reverse for mutating the source range directly.

Examples:

import std.algorithm.comparison : equal;
int[5] a = [ 1, 2, 3, 4, 5 ];
int[5] b = [ 5, 4, 3, 2, 1 ];
assert(equal(retro(a[]), b[]));
assert(retro(a[]).source is a[]);
assert(retro(retro(a[])) is a[]);

auto stride(Range)(Range r, size_t n)
if (isInputRange!(Unqual!Range));

Iterates range r with stride n. If the range is a random-access range, moves by indexing into the range; otherwise, moves by successive calls to popFront. Applying stride twice to the same range results in a stride with a step that is the product of the two applications. It is an error for n to be 0.

Parameters:

Range r	the input range to stride over
size_t n	the number of elements to skip over

Returns:

At minimum, an input range. The resulting range will adopt the range primitives of the underlying range as long as std.range.primitives.hasLength is true.

Examples:

import std.algorithm.comparison : equal;

int[] a = [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 ];
assert(equal(stride(a, 3), [ 1, 4, 7, 10 ][]));
writeln(stride(stride(a, 2), 3)); // stride(a, 6)

auto chain(Ranges...)(Ranges rs)
if (Ranges.length > 0 && allSatisfy!(isInputRange, staticMap!(Unqual, Ranges)) && !is(CommonType!(staticMap!(ElementType, staticMap!(Unqual, Ranges))) == void));

Spans multiple ranges in sequence. The function chain takes any number of ranges and returns a Chain!(R1, R2,...) object. The ranges may be different, but they must have the same element type. The result is a range that offers the front, popFront, and empty primitives. If all input ranges offer random access and length, Chain offers them as well.

Note that repeated random access of the resulting range is likely to perform somewhat badly since lengths of the ranges in the chain have to be added up for each random access operation. Random access to elements of the first remaining range is still efficient.

If only one range is offered to Chain or chain, the Chain type exits the picture by aliasing itself directly to that range's type.

Parameters:

Ranges rs

the input ranges to chain together

Returns:

An input range at minimum. If all of the ranges in rs provide a range primitive, the returned range will also provide that range primitive.

See Also:

only to chain values to a range

Examples:

import std.algorithm.comparison : equal;

int[] arr1 = [ 1, 2, 3, 4 ];
int[] arr2 = [ 5, 6 ];
int[] arr3 = [ 7 ];
auto s = chain(arr1, arr2, arr3);
writeln(s.length); // 7
writeln(s[5]); // 6
assert(equal(s, [1, 2, 3, 4, 5, 6, 7][]));

Examples:

Range primitives are carried over to the returned range if all of the ranges provide them

import std.algorithm.comparison : equal;
import std.algorithm.sorting : sort;

int[] arr1 = [5, 2, 8];
int[] arr2 = [3, 7, 9];
int[] arr3 = [1, 4, 6];

// in-place sorting across all of the arrays
auto s = arr1.chain(arr2, arr3).sort;

assert(s.equal([1, 2, 3, 4, 5, 6, 7, 8, 9]));
assert(arr1.equal([1, 2, 3]));
assert(arr2.equal([4, 5, 6]));
assert(arr3.equal([7, 8, 9]));

Examples:

Due to safe type promotion in D, chaining together different character ranges results in a uint range.

Use byChar, byWchar, and byDchar on the ranges to get the type you need.

import std.utf : byChar, byCodeUnit;

auto s1 = "string one";
auto s2 = "string two";
// s1 and s2 front is dchar because of auto-decoding
static assert(is(typeof(s1.front) == dchar) && is(typeof(s2.front) == dchar));

auto r1 = s1.chain(s2);
// chains of ranges of the same character type give that same type
static assert(is(typeof(r1.front) == dchar));

auto s3 = "string three".byCodeUnit;
static assert(is(typeof(s3.front) == immutable char));
auto r2 = s1.chain(s3);
// chaining ranges of mixed character types gives `dchar`
static assert(is(typeof(r2.front) == dchar));

// use byChar on character ranges to correctly convert them to UTF-8
auto r3 = s1.byChar.chain(s3);
static assert(is(typeof(r3.front) == immutable char));

Examples:

https://issues.dlang.org/show_bug.cgi?id=24064

import std.algorithm.comparison : equal;
import std.typecons : Nullable;

immutable Nullable!string foo = "b";
string[] bar = ["a"];
assert(chain(bar, foo).equal(["a", "b"]));

auto choose(R1, R2)(bool condition, return scope R1 r1, return scope R2 r2)
if (isInputRange!(Unqual!R1) && isInputRange!(Unqual!R2) && !is(CommonType!(ElementType!(Unqual!R1), ElementType!(Unqual!R2)) == void));

Choose one of two ranges at runtime depending on a Boolean condition.

The ranges may be different, but they must have compatible element types (i.e. CommonType must exist for the two element types). The result is a range that offers the weakest capabilities of the two (e.g. ForwardRange if R1 is a random-access range and R2 is a forward range).

Parameters:

bool condition	which range to choose: r1 if true, r2 otherwise
R1 r1	the "true" range
R2 r2	the "false" range

Returns:

A range type dependent on R1 and R2.

Examples:

import std.algorithm.comparison : equal;
import std.algorithm.iteration : filter, map;

auto data1 = only(1, 2, 3, 4).filter!(a => a != 3);
auto data2 = only(5, 6, 7, 8).map!(a => a + 1);

// choose() is primarily useful when you need to select one of two ranges
// with different types at runtime.
static assert(!is(typeof(data1) == typeof(data2)));

auto chooseRange(bool pickFirst)
{
    // The returned range is a common wrapper type that can be used for
    // returning or storing either range without running into a type error.
    return choose(pickFirst, data1, data2);

    // Simply returning the chosen range without using choose() does not
    // work, because map() and filter() return different types.
    //return pickFirst ? data1 : data2; // does not compile
}

auto result = chooseRange(true);
assert(result.equal(only(1, 2, 4)));

result = chooseRange(false);
assert(result.equal(only(6, 7, 8, 9)));

auto chooseAmong(Ranges...)(size_t index, return scope Ranges rs)
if (Ranges.length >= 2 && allSatisfy!(isInputRange, staticMap!(Unqual, Ranges)) && !is(CommonType!(staticMap!(ElementType, Ranges)) == void));

Choose one of multiple ranges at runtime.

The ranges may be different, but they must have compatible element types. The result is a range that offers the weakest capabilities of all Ranges.

Parameters:

size_t index	which range to choose, must be less than the number of ranges
Ranges rs	two or more ranges

Returns:

The indexed range. If rs consists of only one range, the return type is an alias of that range's type.

Examples:

auto test()
{
    import std.algorithm.comparison : equal;

    int[4] sarr1 = [1, 2, 3, 4];
    int[2] sarr2 = [5, 6];
    int[1] sarr3 = [7];
    auto arr1 = sarr1[];
    auto arr2 = sarr2[];
    auto arr3 = sarr3[];

    {
        auto s = chooseAmong(0, arr1, arr2, arr3);
        auto t = s.save;
        writeln(s.length); // 4
        writeln(s[2]); // 3
        s.popFront();
        assert(equal(t, only(1, 2, 3, 4)));
    }
    {
        auto s = chooseAmong(1, arr1, arr2, arr3);
        writeln(s.length); // 2
        s.front = 8;
        assert(equal(s, only(8, 6)));
    }
    {
        auto s = chooseAmong(1, arr1, arr2, arr3);
        writeln(s.length); // 2
        s[1] = 9;
        assert(equal(s, only(8, 9)));
    }
    {
        auto s = chooseAmong(1, arr2, arr1, arr3)[1 .. 3];
        writeln(s.length); // 2
        assert(equal(s, only(2, 3)));
    }
    {
        auto s = chooseAmong(0, arr1, arr2, arr3);
        writeln(s.length); // 4
        writeln(s.back); // 4
        s.popBack();
        s.back = 5;
        assert(equal(s, only(1, 2, 5)));
        s.back = 3;
        assert(equal(s, only(1, 2, 3)));
    }
    {
        uint[5] foo = [1, 2, 3, 4, 5];
        uint[5] bar = [6, 7, 8, 9, 10];
        auto c = chooseAmong(1, foo[], bar[]);
        writeln(c[3]); // 9
        c[3] = 42;
        writeln(c[3]); // 42
        writeln(c.moveFront()); // 6
        writeln(c.moveBack()); // 10
        writeln(c.moveAt(4)); // 10
    }
    {
        import std.range : cycle;
        auto s = chooseAmong(0, cycle(arr2), cycle(arr3));
        assert(isInfinite!(typeof(s)));
        assert(!s.empty);
        writeln(s[100]); // 8
        writeln(s[101]); // 9
        assert(s[0 .. 3].equal(only(8, 9, 8)));
    }
    return 0;
}
// works at runtime
auto a = test();
// and at compile time
static b = test();

auto roundRobin(Rs...)(Rs rs)
if (Rs.length > 1 && allSatisfy!(isInputRange, staticMap!(Unqual, Rs)));

roundRobin(r1, r2, r3) yields r1.front, then r2.front, then r3.front, after which it pops off one element from each and continues again from r1. For example, if two ranges are involved, it alternately yields elements off the two ranges. roundRobin stops after it has consumed all ranges (skipping over the ones that finish early).

Examples:

import std.algorithm.comparison : equal;

int[] a = [ 1, 2, 3 ];
int[] b = [ 10, 20, 30, 40 ];
auto r = roundRobin(a, b);
assert(equal(r, [ 1, 10, 2, 20, 3, 30, 40 ]));

Examples:

roundRobin can be used to create "interleave" functionality which inserts an element between each element in a range.

import std.algorithm.comparison : equal;

auto interleave(R, E)(R range, E element)
if ((isInputRange!R && hasLength!R) || isForwardRange!R)
{
    static if (hasLength!R)
        immutable len = range.length;
    else
        immutable len = range.save.walkLength;

    return roundRobin(
        range,
        element.repeat(len - 1)
    );
}

assert(interleave([1, 2, 3], 0).equal([1, 0, 2, 0, 3]));

auto radial(Range, I)(Range r, I startingIndex)
if (isRandomAccessRange!(Unqual!Range) && hasLength!(Unqual!Range) && hasSlicing!(Unqual!Range) && isIntegral!I);

auto radial(R)(R r)
if (isRandomAccessRange!(Unqual!R) && hasLength!(Unqual!R) && hasSlicing!(Unqual!R));

Iterates a random-access range starting from a given point and progressively extending left and right from that point. If no initial point is given, iteration starts from the middle of the range. Iteration spans the entire range.

When startingIndex is 0 the range will be fully iterated in order and in reverse order when r.length is given.

Parameters:

Range r	a random access range with length and slicing
I startingIndex	the index to begin iteration from

Returns:

A forward range with length

Examples:

import std.algorithm.comparison : equal;
int[] a = [ 1, 2, 3, 4, 5 ];
assert(equal(radial(a), [ 3, 4, 2, 5, 1 ]));
a = [ 1, 2, 3, 4 ];
assert(equal(radial(a), [ 2, 3, 1, 4 ]));

// If the left end is reached first, the remaining elements on the right
// are concatenated in order:
a = [ 0, 1, 2, 3, 4, 5 ];
assert(equal(radial(a, 1), [ 1, 2, 0, 3, 4, 5 ]));

// If the right end is reached first, the remaining elements on the left
// are concatenated in reverse order:
assert(equal(radial(a, 4), [ 4, 5, 3, 2, 1, 0 ]));

Take!R take(R)(R input, size_t n)
if (isInputRange!(Unqual!R));

struct Take(Range) if (isInputRange!(Unqual!Range) && !(!isInfinite!(Unqual!Range) && hasSlicing!(Unqual!Range) || is(Range T == Take!T)));

template Take(R) if (isInputRange!(Unqual!R) && (!isInfinite!(Unqual!R) && hasSlicing!(Unqual!R) || is(R T == Take!T)))

Lazily takes only up to n elements of a range. This is particularly useful when using with infinite ranges.

Unlike takeExactly, take does not require that there are n or more elements in input. As a consequence, length information is not applied to the result unless input also has length information.

Parameters:

R input	an input range to iterate over up to n times
size_t n	the number of elements to take

Returns:

At minimum, an input range. If the range offers random access and length, take offers them as well.

Examples:

import std.algorithm.comparison : equal;

int[] arr1 = [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 ];
auto s = take(arr1, 5);
writeln(s.length); // 5
writeln(s[4]); // 5
assert(equal(s, [ 1, 2, 3, 4, 5 ][]));

Examples:

If the range runs out before n elements, take simply returns the entire range (unlike takeExactly, which will cause an assertion failure if the range ends prematurely):

import std.algorithm.comparison : equal;

int[] arr2 = [ 1, 2, 3 ];
auto t = take(arr2, 5);
writeln(t.length); // 3
assert(equal(t, [ 1, 2, 3 ]));

auto takeExactly(R)(R range, size_t n)
if (isInputRange!R);

Similar to take, but assumes that range has at least n elements. Consequently, the result of takeExactly(range, n) always defines the length property (and initializes it to n) even when range itself does not define length.

The result of takeExactly is identical to that of take in cases where the original range defines length or is infinite.

Unlike take, however, it is illegal to pass a range with less than n elements to takeExactly; this will cause an assertion failure.

Examples:

import std.algorithm.comparison : equal;

auto a = [ 1, 2, 3, 4, 5 ];

auto b = takeExactly(a, 3);
assert(equal(b, [1, 2, 3]));
static assert(is(typeof(b.length) == size_t));
writeln(b.length); // 3
writeln(b.front); // 1
writeln(b.back); // 3

auto takeOne(R)(R source)
if (isInputRange!R);

Returns a range with at most one element; for example, takeOne([42, 43, 44]) returns a range consisting of the integer 42. Calling popFront() off that range renders it empty.

In effect takeOne(r) is somewhat equivalent to take(r, 1) but in certain interfaces it is important to know statically that the range may only have at most one element.

The type returned by takeOne is a random-access range with length regardless of R's capabilities, as long as it is a forward range. (another feature that distinguishes takeOne from take). If (D R) is an input range but not a forward range, return type is an input range with all random-access capabilities except save.

Examples:

auto s = takeOne([42, 43, 44]);
static assert(isRandomAccessRange!(typeof(s)));
writeln(s.length); // 1
assert(!s.empty);
writeln(s.front); // 42
s.front = 43;
writeln(s.front); // 43
writeln(s.back); // 43
writeln(s[0]); // 43
s.popFront();
writeln(s.length); // 0
assert(s.empty);

auto takeNone(R)()
if (isInputRange!R);

Returns an empty range which is statically known to be empty and is guaranteed to have length and be random access regardless of R's capabilities.

Examples:

auto range = takeNone!(int[])();
writeln(range.length); // 0
assert(range.empty);

auto takeNone(R)(R range)
if (isInputRange!R);

Creates an empty range from the given range in Ο(1). If it can, it will return the same range type. If not, it will return takeExactly(range, 0).

Examples:

import std.algorithm.iteration : filter;
assert(takeNone([42, 27, 19]).empty);
assert(takeNone("dlang.org").empty);
assert(takeNone(filter!"true"([42, 27, 19])).empty);

auto tail(Range)(Range range, size_t n)
if (isInputRange!Range && !isInfinite!Range && (hasLength!Range || isForwardRange!Range));

Return a range advanced to within _n elements of the end of range.

Intended as the range equivalent of the Unix tail utility. When the length of range is less than or equal to _n, range is returned as-is.

Completes in Ο(1) steps for ranges that support slicing and have length. Completes in Ο(range.length) time for all other ranges.

Parameters:

Range range	range to get tail of
size_t n	maximum number of elements to include in tail

Returns:

Returns the tail of range augmented with length information

Examples:

// tail -c n
writeln([1, 2, 3].tail(1)); // [3]
writeln([1, 2, 3].tail(2)); // [2, 3]
writeln([1, 2, 3].tail(3)); // [1, 2, 3]
writeln([1, 2, 3].tail(4)); // [1, 2, 3]
writeln([1, 2, 3].tail(0).length); // 0

// tail --lines=n
import std.algorithm.comparison : equal;
import std.algorithm.iteration : joiner;
import std.exception : assumeWontThrow;
import std.string : lineSplitter;
assert("one\ntwo\nthree"
    .lineSplitter
    .tail(2)
    .joiner("\n")
    .equal("two\nthree")
    .assumeWontThrow);

R drop(R)(R range, size_t n)
if (isInputRange!R);

R dropBack(R)(R range, size_t n)
if (isBidirectionalRange!R);

Convenience function which calls std.range.primitives.popFrontN(range, n) and returns range. drop makes it easier to pop elements from a range and then pass it to another function within a single expression, whereas popFrontN would require multiple statements.

dropBack provides the same functionality but instead calls std.range.primitives.popBackN(range, n)

Note drop and dropBack will only pop up to n elements but will stop if the range is empty first. In other languages this is sometimes called skip.

Parameters:

R range	the input range to drop from
size_t n	the number of elements to drop

Returns:

range with up to n elements dropped

See Also:

std.range.primitives.popFront, std.range.primitives.popBackN

Examples:

import std.algorithm.comparison : equal;

writeln([0, 2, 1, 5, 0, 3].drop(3)); // [5, 0, 3]
writeln("hello world".drop(6)); // "world"
assert("hello world".drop(50).empty);
assert("hello world".take(6).drop(3).equal("lo "));

Examples:

import std.algorithm.comparison : equal;

writeln([0, 2, 1, 5, 0, 3].dropBack(3)); // [0, 2, 1]
writeln("hello world".dropBack(6)); // "hello"
assert("hello world".dropBack(50).empty);
assert("hello world".drop(4).dropBack(4).equal("o w"));

R dropExactly(R)(R range, size_t n)
if (isInputRange!R);

R dropBackExactly(R)(R range, size_t n)
if (isBidirectionalRange!R);

Similar to drop and dropBack but they call range.popFrontExactly(n) and range.popBackExactly(n) instead.

Note Unlike drop, dropExactly will assume that the range holds at least n elements. This makes dropExactly faster than drop, but it also means that if range does not contain at least n elements, it will attempt to call popFront on an empty range, which is undefined behavior. So, only use popFrontExactly when it is guaranteed that range holds at least n elements.

Parameters:

R range	the input range to drop from
size_t n	the number of elements to drop

Returns:

range with n elements dropped

See Also:

std.range.primitives.popFrontExcatly, std.range.primitives.popBackExcatly

Examples:

import std.algorithm.comparison : equal;
import std.algorithm.iteration : filterBidirectional;

auto a = [1, 2, 3];
writeln(a.dropExactly(2)); // [3]
writeln(a.dropBackExactly(2)); // [1]

string s = "日本語";
writeln(s.dropExactly(2)); // "語"
writeln(s.dropBackExactly(2)); // "日"

auto bd = filterBidirectional!"true"([1, 2, 3]);
assert(bd.dropExactly(2).equal([3]));
assert(bd.dropBackExactly(2).equal([1]));

R dropOne(R)(R range)
if (isInputRange!R);

R dropBackOne(R)(R range)
if (isBidirectionalRange!R);

Convenience function which calls range.popFront() and returns range. dropOne makes it easier to pop an element from a range and then pass it to another function within a single expression, whereas popFront would require multiple statements.

dropBackOne provides the same functionality but instead calls range.popBack().

Examples:

import std.algorithm.comparison : equal;
import std.algorithm.iteration : filterBidirectional;
import std.container.dlist : DList;

auto dl = DList!int(9, 1, 2, 3, 9);
assert(dl[].dropOne().dropBackOne().equal([1, 2, 3]));

auto a = [1, 2, 3];
writeln(a.dropOne()); // [2, 3]
writeln(a.dropBackOne()); // [1, 2]

string s = "日本語";
import std.exception : assumeWontThrow;
assert(assumeWontThrow(s.dropOne() == "本語"));
assert(assumeWontThrow(s.dropBackOne() == "日本"));

auto bd = filterBidirectional!"true"([1, 2, 3]);
assert(bd.dropOne().equal([2, 3]));
assert(bd.dropBackOne().equal([1, 2]));

struct Repeat(T);

Repeat!T repeat(T)(T value);

Take!(Repeat!T) repeat(T)(T value, size_t n);

Create a range which repeats one value.

Parameters:

T value	the value to repeat
size_t n	the number of times to repeat value

Returns:

If n is not defined, an infinite random access range with slicing.

If n is defined, a random access range with slicing.

Examples:

import std.algorithm.comparison : equal;

assert(5.repeat().take(4).equal([5, 5, 5, 5]));

Examples:

import std.algorithm.comparison : equal;

assert(5.repeat(4).equal([5, 5, 5, 5]));

inout @property inout(T) front();

inout @property inout(T) back();

enum bool empty;

void popFront();

void popBack();

inout @property auto save();

inout inout(T) opIndex(size_t);

auto opSlice(size_t i, size_t j);

enum auto opDollar;

inout auto opSlice(size_t, DollarToken);

Range primitives

auto generate(Fun)(Fun fun)
if (isCallable!fun);

auto generate(alias fun)()
if (isCallable!fun);

Given callable (std.traits.isCallable) fun, create as a range whose front is defined by successive calls to fun(). This is especially useful to call function with global side effects (random functions), or to create ranges expressed as a single delegate, rather than an entire front/popFront/empty structure. fun maybe be passed either a template alias parameter (existing function, delegate, struct type defining static opCall) or a run-time value argument (delegate, function object). The result range models an InputRange (std.range.primitives.isInputRange). The resulting range will call fun() on construction, and every call to popFront, and the cached value will be returned when front is called.

Returns:

an inputRange where each element represents another call to fun.

Examples:

import std.algorithm.comparison : equal;
import std.algorithm.iteration : map;

int i = 1;
auto powersOfTwo = generate!(() => i *= 2)().take(10);
assert(equal(powersOfTwo, iota(1, 11).map!"2^^a"()));

Examples:

import std.algorithm.comparison : equal;

//Returns a run-time delegate
auto infiniteIota(T)(T low, T high)
{
    T i = high;
    return (){if (i == high) i = low; return i++;};
}
//adapted as a range.
assert(equal(generate(infiniteIota(1, 4)).take(10), [1, 2, 3, 1, 2, 3, 1, 2, 3, 1]));

Examples:

import std.format : format;
import std.random : uniform;

auto r = generate!(() => uniform(0, 6)).take(10);
format("%(%s %)", r);

struct Cycle(R) if (isForwardRange!R && !isInfinite!R);

template Cycle(R) if (isInfinite!R)

struct Cycle(R) if (isStaticArray!R);

auto cycle(R)(R input)
if (isInputRange!R);

Cycle!R cycle(R)(R input, size_t index = 0)
if (isRandomAccessRange!R && !isInfinite!R);

@system Cycle!R cycle(R)(ref R input, size_t index = 0)
if (isStaticArray!R);

Repeats the given forward range ad infinitum. If the original range is infinite (fact that would make Cycle the identity application), Cycle detects that and aliases itself to the range type itself. That works for non-forward ranges too. If the original range has random access, Cycle offers random access and also offers a constructor taking an initial position index. Cycle works with static arrays in addition to ranges, mostly for performance reasons.

Note The input range must not be empty.

Tip This is a great way to implement simple circular buffers.

Examples:

import std.algorithm.comparison : equal;
import std.range : cycle, take;

// Here we create an infinitive cyclic sequence from [1, 2]
// (i.e. get here [1, 2, 1, 2, 1, 2 and so on]) then
// take 5 elements of this sequence (so we have [1, 2, 1, 2, 1])
// and compare them with the expected values for equality.
assert(cycle([1, 2]).take(5).equal([ 1, 2, 1, 2, 1 ]));

this(R input, size_t index = 0);

@property ref auto front();

const @property ref auto front();

@property void front(ElementType!R val);

enum bool empty;

void popFront();

ref auto opIndex(size_t n);

const ref auto opIndex(size_t n);

void opIndexAssign(ElementType!R val, size_t n);

@property Cycle save();

enum auto opDollar;

auto opSlice(size_t i, size_t j);

auto opSlice(size_t i, DollarToken);

Range primitives

struct Zip(Ranges...) if (Ranges.length && allSatisfy!(isInputRange, Ranges));

auto zip(Ranges...)(Ranges ranges)
if (Ranges.length && allSatisfy!(isInputRange, Ranges));

auto zip(Ranges...)(StoppingPolicy sp, Ranges ranges)
if (Ranges.length && allSatisfy!(isInputRange, Ranges));

Iterate several ranges in lockstep. The element type is a proxy tuple that allows accessing the current element in the nth range by using e[n].

zip is similar to lockstep, but lockstep doesn't bundle its elements and uses the opApply protocol. lockstep allows reference access to the elements in foreach iterations.

Parameters:

StoppingPolicy sp	controls what zip will do if the ranges are different lengths
Ranges ranges	the ranges to zip together

Returns:

At minimum, an input range. Zip offers the lowest range facilities of all components, e.g. it offers random access iff all ranges offer random access, and also offers mutation and swapping if all ranges offer it. Due to this, Zip is extremely powerful because it allows manipulating several ranges in lockstep.

Throws:

An Exception if all of the ranges are not the same length and sp is set to StoppingPolicy.requireSameLength.

Limitations The @nogc and nothrow attributes cannot be inferred for the Zip struct because StoppingPolicy can vary at runtime. This limitation is not shared by the anonymous range returned by the zip function when not given an explicit StoppingPolicy as an argument.

Examples:

import std.algorithm.comparison : equal;
import std.algorithm.iteration : map;

// pairwise sum
auto arr = only(0, 1, 2);
auto part1 = zip(arr, arr.dropOne).map!"a[0] + a[1]";
assert(part1.equal(only(1, 3)));

Examples:

import std.conv : to;

int[] a = [ 1, 2, 3 ];
string[] b = [ "a", "b", "c" ];
string[] result;

foreach (tup; zip(a, b))
{
    result ~= tup[0].to!string ~ tup[1];
}

writeln(result); // ["1a", "2b", "3c"]

size_t idx = 0;
// unpacking tuple elements with foreach
foreach (e1, e2; zip(a, b))
{
    writeln(e1); // a[idx]
    writeln(e2); // b[idx]
    ++idx;
}

Examples:

zip is powerful - the following code sorts two arrays in parallel:

import std.algorithm.sorting : sort;

int[] a = [ 1, 2, 3 ];
string[] b = [ "a", "c", "b" ];
zip(a, b).sort!((t1, t2) => t1[0] > t2[0]);

writeln(a); // [3, 2, 1]
// b is sorted according to a's sorting
writeln(b); // ["b", "c", "a"]

this(R rs, StoppingPolicy s = StoppingPolicy.shortest);

Builds an object. Usually this is invoked indirectly by using the zip function.

enum bool empty;

Returns true if the range is at end. The test depends on the stopping policy.

@property Zip save();

@property ElementType front();

Returns the current iterated element.

@property void front(ElementType v);

Sets the front of all iterated ranges.

ElementType moveFront();

Moves out the front.

@property ElementType back();

Returns the rightmost element.

ElementType moveBack();

Moves out the back.

Returns the rightmost element.

@property void back(ElementType v);

Returns the current iterated element.

Returns the rightmost element.

void popFront();

Advances to the next element in all controlled ranges.

void popBack();

Calls popBack for all controlled ranges.

@property auto length();

Returns the length of this range. Defined only if all ranges define length.

alias opDollar = length;

Returns the length of this range. Defined only if all ranges define length.

auto opSlice(size_t from, size_t to);

Returns a slice of the range. Defined only if all range define slicing.

ElementType opIndex(size_t n);

Returns the nth element in the composite range. Defined if all ranges offer random access.

void opIndexAssign(ElementType v, size_t n);

Assigns to the nth element in the composite range. Defined if all ranges offer random access.

Returns the nth element in the composite range. Defined if all ranges offer random access.

ElementType moveAt(size_t n);

Destructively reads the nth element in the composite range. Defined if all ranges offer random access.

Returns the nth element in the composite range. Defined if all ranges offer random access.

enum StoppingPolicy: int;

Dictates how iteration in a zip and lockstep should stop. By default stop at the end of the shortest of all ranges.

Examples:

import std.algorithm.comparison : equal;
import std.exception : assertThrown;
import std.range.primitives;
import std.typecons : tuple;

auto a = [1, 2, 3];
auto b = [4, 5, 6, 7];

auto shortest = zip(StoppingPolicy.shortest, a, b);
assert(shortest.equal([
    tuple(1, 4),
    tuple(2, 5),
    tuple(3, 6)
]));

auto longest = zip(StoppingPolicy.longest, a, b);
assert(longest.equal([
    tuple(1, 4),
    tuple(2, 5),
    tuple(3, 6),
    tuple(0, 7)
]));

auto same = zip(StoppingPolicy.requireSameLength, a, b);
same.popFrontN(3);
assertThrown!Exception(same.popFront);

shortest

Stop when the shortest range is exhausted

longest

Stop when the longest range is exhausted

requireSameLength

Require that all ranges are equal

struct Lockstep(Ranges...) if (Ranges.length > 1 && allSatisfy!(isInputRange, Ranges));

Lockstep!Ranges lockstep(Ranges...)(Ranges ranges)
if (allSatisfy!(isInputRange, Ranges));

Lockstep!Ranges lockstep(Ranges...)(Ranges ranges, StoppingPolicy s)
if (allSatisfy!(isInputRange, Ranges));

Iterate multiple ranges in lockstep using a foreach loop. In contrast to zip it allows reference access to its elements. If only a single range is passed in, the Lockstep aliases itself away. If the ranges are of different lengths and s == StoppingPolicy.shortest stop after the shortest range is empty. If the ranges are of different lengths and s == StoppingPolicy.requireSameLength, throw an exception. s may not be StoppingPolicy.longest, and passing this will throw an exception.

Iterating over Lockstep in reverse and with an index is only possible when s == StoppingPolicy.requireSameLength, in order to preserve indexes. If an attempt is made at iterating in reverse when s == StoppingPolicy.shortest, an exception will be thrown.

By default StoppingPolicy is set to StoppingPolicy.shortest.

Limitations The pure, @safe, @nogc, or nothrow attributes cannot be inferred for lockstep iteration. zip can infer the first two due to a different implementation.

See Also:

zip

lockstep is similar to zip, but zip bundles its elements and returns a range. lockstep also supports reference access. Use zip if you want to pass the result to a range function.

Examples:

auto arr1 = [1,2,3,4,5,100];
auto arr2 = [6,7,8,9,10];

foreach (ref a, b; lockstep(arr1, arr2))
{
    a += b;
}

writeln(arr1); // [7, 9, 11, 13, 15, 100]

/// Lockstep also supports iterating with an index variable:
foreach (index, a, b; lockstep(arr1, arr2))
{
    writeln(arr1[index]); // a
    writeln(arr2[index]); // b
}

this(R ranges, StoppingPolicy sp = StoppingPolicy.shortest);

struct Recurrence(alias fun, StateType, size_t stateSize);

Recurrence!(fun, CommonType!State, State.length) recurrence(alias fun, State...)(State initial);

Creates a mathematical sequence given the initial values and a recurrence function that computes the next value from the existing values. The sequence comes in the form of an infinite forward range. The type Recurrence itself is seldom used directly; most often, recurrences are obtained by calling the function recurrence.

When calling recurrence, the function that computes the next value is specified as a template argument, and the initial values in the recurrence are passed as regular arguments. For example, in a Fibonacci sequence, there are two initial values (and therefore a state size of 2) because computing the next Fibonacci value needs the past two values.

The signature of this function should be:

auto fun(R)(R state, size_t n)

where n will be the index of the current value, and state will be an opaque state vector that can be indexed with array-indexing notation state[i], where valid values of i range from (n - 1) to (n - State.length).

If the function is passed in string form, the state has name "a" and the zero-based index in the recurrence has name "n". The given string must return the desired value for a[n] given a[n - 1], a[n - 2], a[n - 3],..., a[n - stateSize]. The state size is dictated by the number of arguments passed to the call to recurrence. The Recurrence struct itself takes care of managing the recurrence's state and shifting it appropriately.

Examples:

import std.algorithm.comparison : equal;

// The Fibonacci numbers, using function in string form:
// a[0] = 1, a[1] = 1, and compute a[n+1] = a[n-1] + a[n]
auto fib = recurrence!("a[n-1] + a[n-2]")(1, 1);
assert(fib.take(10).equal([1, 1, 2, 3, 5, 8, 13, 21, 34, 55]));

// The factorials, using function in lambda form:
auto fac = recurrence!((a,n) => a[n-1] * n)(1);
assert(take(fac, 10).equal([
    1, 1, 2, 6, 24, 120, 720, 5040, 40320, 362880
]));

// The triangular numbers, using function in explicit form:
static size_t genTriangular(R)(R state, size_t n)
{
    return state[n-1] + n;
}
auto tri = recurrence!genTriangular(0);
assert(take(tri, 10).equal([0, 1, 3, 6, 10, 15, 21, 28, 36, 45]));

struct Sequence(alias fun, State);

auto sequence(alias fun, State...)(State args);

Sequence is similar to Recurrence except that iteration is presented in the so-called closed form. This means that the nth element in the series is computable directly from the initial values and n itself. This implies that the interface offered by Sequence is a random-access range, as opposed to the regular Recurrence, which only offers forward iteration.

The state of the sequence is stored as a Tuple so it can be heterogeneous.

Examples:

Odd numbers, using function in string form:

auto odds = sequence!("a[0] + n * a[1]")(1, 2);
writeln(odds.front); // 1
odds.popFront();
writeln(odds.front); // 3
odds.popFront();
writeln(odds.front); // 5

Examples:

Triangular numbers, using function in lambda form:

auto tri = sequence!((a,n) => n*(n+1)/2)();

// Note random access
writeln(tri[0]); // 0
writeln(tri[3]); // 6
writeln(tri[1]); // 1
writeln(tri[4]); // 10
writeln(tri[2]); // 3

Examples:

Fibonacci numbers, using function in explicit form:

import std.math.exponential : pow;
import std.math.rounding : round;
import std.math.algebraic : sqrt;
static ulong computeFib(S)(S state, size_t n)
{
    // Binet's formula
    return cast(ulong)(round((pow(state[0], n+1) - pow(state[1], n+1)) /
                             state[2]));
}
auto fib = sequence!computeFib(
    (1.0 + sqrt(5.0)) / 2.0,    // Golden Ratio
    (1.0 - sqrt(5.0)) / 2.0,    // Conjugate of Golden Ratio
    sqrt(5.0));

// Note random access with [] operator
writeln(fib[1]); // 1
writeln(fib[4]); // 5
writeln(fib[3]); // 3
writeln(fib[2]); // 2
writeln(fib[9]); // 55

auto iota(B, E, S)(B begin, E end, S step)
if ((isIntegral!(CommonType!(B, E)) || isPointer!(CommonType!(B, E))) && isIntegral!S);

auto iota(B, E)(B begin, E end)
if (isFloatingPoint!(CommonType!(B, E)));

auto iota(B, E)(B begin, E end)
if (isIntegral!(CommonType!(B, E)) || isPointer!(CommonType!(B, E)));

auto iota(E)(E end)
if (is(typeof(iota(E(0), end))));

auto iota(B, E, S)(B begin, E end, S step)
if (isFloatingPoint!(CommonType!(B, E, S)));

auto iota(B, E)(B begin, E end)
if (!isIntegral!(CommonType!(B, E)) && !isFloatingPoint!(CommonType!(B, E)) && !isPointer!(CommonType!(B, E)) && is(typeof((ref B b) { ++b; } )) && (is(typeof(B.init < E.init)) || is(typeof(B.init == E.init))));

Creates a range of values that span the given starting and stopping values.

Parameters:

B begin	The starting value.
E end	The value that serves as the stopping criterion. This value is not included in the range.
S step	The value to add to the current value at each iteration.

Returns:

A range that goes through the numbers begin, begin + step, begin + 2 * step, ..., up to and excluding end.

The two-argument overloads have step = 1. If begin < end && step < 0 or begin > end && step > 0 or begin == end, then an empty range is returned. If step == 0 then begin == end is an error.

For built-in types, the range returned is a random access range. For user-defined types that support ++, the range is an input range.

An integral iota also supports in operator from the right. It takes the stepping into account, the integral won't be considered contained if it falls between two consecutive values of the range. contains does the same as in, but from lefthand side.

Example

void main()
{
    import std.stdio;

    // The following groups all produce the same output of:
    // 0 1 2 3 4

    foreach (i; 0 .. 5)
        writef("%s ", i);
    writeln();

    import std.range : iota;
    foreach (i; iota(0, 5))
        writef("%s ", i);
    writeln();

    writefln("%(%s %|%)", iota(0, 5));

    import std.algorithm.iteration : map;
    import std.algorithm.mutation : copy;
    import std.format;
    iota(0, 5).map!(i => format("%s ", i)).copy(stdout.lockingTextWriter());
    writeln();
}

Examples:

import std.algorithm.comparison : equal;
import std.math.operations : isClose;

auto r = iota(0, 10, 1);
assert(equal(r, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]));
assert(equal(r, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]));
assert(3 in r);
assert(r.contains(3)); //Same as above
assert(!(10 in r));
assert(!(-8 in r));
r = iota(0, 11, 3);
assert(equal(r, [0, 3, 6, 9]));
writeln(r[2]); // 6
assert(!(2 in r));
auto rf = iota(0.0, 0.5, 0.1);
assert(isClose(rf, [0.0, 0.1, 0.2, 0.3, 0.4]));

enum TransverseOptions: int;

Options for the FrontTransversal and Transversal ranges (below).

Examples:

import std.algorithm.comparison : equal;
import std.exception : assertThrown;

auto arr = [[1, 2], [3, 4, 5]];

auto r1 = arr.frontTransversal!(TransverseOptions.assumeJagged);
assert(r1.equal([1, 3]));

// throws on construction
assertThrown!Exception(arr.frontTransversal!(TransverseOptions.enforceNotJagged));

auto r2 = arr.frontTransversal!(TransverseOptions.assumeNotJagged);
assert(r2.equal([1, 3]));

// either assuming or checking for equal lengths makes
// the result a random access range
writeln(r2[0]); // 1
static assert(!__traits(compiles, r1[0]));

assumeJagged

When transversed, the elements of a range of ranges are assumed to have different lengths (e.g. a jagged array).

enforceNotJagged

The transversal enforces that the elements of a range of ranges have all the same length (e.g. an array of arrays, all having the same length). Checking is done once upon construction of the transversal range.

assumeNotJagged

The transversal assumes, without verifying, that the elements of a range of ranges have all the same length. This option is useful if checking was already done from the outside of the range.

struct FrontTransversal(Ror, TransverseOptions opt = TransverseOptions.assumeJagged);

FrontTransversal!(RangeOfRanges, opt) frontTransversal(TransverseOptions opt = TransverseOptions.assumeJagged, RangeOfRanges)(RangeOfRanges rr);

Given a range of ranges, iterate transversally through the first elements of each of the enclosed ranges.

Examples:

import std.algorithm.comparison : equal;
int[][] x = new int[][2];
x[0] = [1, 2];
x[1] = [3, 4];
auto ror = frontTransversal(x);
assert(equal(ror, [ 1, 3 ][]));

this(RangeOfRanges input);

Construction from an input.

enum bool empty;

@property ref auto front();

ElementType moveFront();

void popFront();

Forward range primitives.

@property FrontTransversal save();

Duplicates this frontTransversal. Note that only the encapsulating range of range will be duplicated. Underlying ranges will not be duplicated.

@property ref auto back();

void popBack();

ElementType moveBack();

Bidirectional primitives. They are offered if isBidirectionalRange!RangeOfRanges.

ref auto opIndex(size_t n);

ElementType moveAt(size_t n);

void opIndexAssign(ElementType val, size_t n);

Random-access primitive. It is offered if isRandomAccessRange!RangeOfRanges && (opt == TransverseOptions.assumeNotJagged || opt == TransverseOptions.enforceNotJagged).

typeof(this) opSlice(size_t lower, size_t upper);

Slicing if offered if RangeOfRanges supports slicing and all the conditions for supporting indexing are met.

struct Transversal(Ror, TransverseOptions opt = TransverseOptions.assumeJagged);

Transversal!(RangeOfRanges, opt) transversal(TransverseOptions opt = TransverseOptions.assumeJagged, RangeOfRanges)(RangeOfRanges rr, size_t n);

Given a range of ranges, iterate transversally through the nth element of each of the enclosed ranges. This function is similar to unzip in other languages.

Parameters:

opt	Controls the assumptions the function makes about the lengths of the ranges
RangeOfRanges rr	An input range of random access ranges

Returns:

At minimum, an input range. Range primitives such as bidirectionality and random access are given if the element type of rr provides them.

Examples:

import std.algorithm.comparison : equal;
int[][] x = new int[][2];
x[0] = [1, 2];
x[1] = [3, 4];
auto ror = transversal(x, 1);
assert(equal(ror, [ 2, 4 ]));

Examples:

The following code does a full unzip

import std.algorithm.comparison : equal;
import std.algorithm.iteration : map;
int[][] y = [[1, 2, 3], [4, 5, 6]];
auto z = y.front.walkLength.iota.map!(i => transversal(y, i));
assert(equal!equal(z, [[1, 4], [2, 5], [3, 6]]));

this(RangeOfRanges input, size_t n);

Construction from an input and an index.

enum bool empty;

@property ref auto front();

E moveFront();

@property void front(E val);

void popFront();

@property typeof(this) save();

Forward range primitives.

@property ref auto back();

void popBack();

E moveBack();

@property void back(E val);

Bidirectional primitives. They are offered if isBidirectionalRange!RangeOfRanges.

ref auto opIndex(size_t n);

E moveAt(size_t n);

void opIndexAssign(E val, size_t n);

Random-access primitive. It is offered if isRandomAccessRange!RangeOfRanges && (opt == TransverseOptions.assumeNotJagged || opt == TransverseOptions.enforceNotJagged).

typeof(this) opSlice(size_t lower, size_t upper);

Slicing if offered if RangeOfRanges supports slicing and all the conditions for supporting indexing are met.

Transposed!(RangeOfRanges, opt) transposed(TransverseOptions opt = TransverseOptions.assumeJagged, RangeOfRanges)(RangeOfRanges rr)
if (isForwardRange!RangeOfRanges && isInputRange!(ElementType!RangeOfRanges) && hasAssignableElements!RangeOfRanges);

Given a range of ranges, returns a range of ranges where the i'th subrange contains the i'th elements of the original subranges.

Parameters:

opt	Controls the assumptions the function makes about the lengths of the ranges (i.e. jagged or not)
RangeOfRanges rr	Range of ranges

Examples:

import std.algorithm.comparison : equal;
int[][] ror = [
    [1, 2, 3],
    [4, 5, 6]
];
auto xp = transposed(ror);
assert(equal!"a.equal(b)"(xp, [
    [1, 4],
    [2, 5],
    [3, 6]
]));

Examples:

int[][] x = new int[][2];
x[0] = [1, 2];
x[1] = [3, 4];
auto tr = transposed(x);
int[][] witness = [ [ 1, 3 ], [ 2, 4 ] ];
uint i;

foreach (e; tr)
{
    writeln(array(e)); // witness[i++]
}

struct Indexed(Source, Indices) if (isRandomAccessRange!Source && isInputRange!Indices && is(typeof(Source.init[ElementType!Indices.init])));

Indexed!(Source, Indices) indexed(Source, Indices)(Source source, Indices indices);

This struct takes two ranges, source and indices, and creates a view of source as if its elements were reordered according to indices. indices may include only a subset of the elements of source and may also repeat elements.

Source must be a random access range. The returned range will be bidirectional or random-access if Indices is bidirectional or random-access, respectively.

Examples:

import std.algorithm.comparison : equal;
auto source = [1, 2, 3, 4, 5];
auto indices = [4, 3, 1, 2, 0, 4];
auto ind = indexed(source, indices);
assert(equal(ind, [5, 4, 2, 3, 1, 5]));
assert(equal(retro(ind), [5, 1, 3, 2, 4, 5]));

@property ref auto front();

void popFront();

@property typeof(this) save();

@property ref auto front(ElementType!Source newVal);

auto moveFront();

@property ref auto back();

void popBack();

@property ref auto back(ElementType!Source newVal);

auto moveBack();

ref auto opIndex(size_t index);

typeof(this) opSlice(size_t a, size_t b);

auto opIndexAssign(ElementType!Source newVal, size_t index);

auto moveAt(size_t index);

Range primitives

@property Source source();

Returns the source range.

@property Indices indices();

Returns the indices range.

size_t physicalIndex(size_t logicalIndex);

Returns the physical index into the source range corresponding to a given logical index. This is useful, for example, when indexing an Indexed without adding another layer of indirection.

Examples:

auto ind = indexed([1, 2, 3, 4, 5], [1, 3, 4]);
writeln(ind.physicalIndex(0)); // 1

struct Chunks(Source) if (isInputRange!Source);

Chunks!Source chunks(Source)(Source source, size_t chunkSize)
if (isInputRange!Source);

This range iterates over fixed-sized chunks of size chunkSize of a source range. Source must be an input range. chunkSize must be greater than zero.

If !isInfinite!Source and source.walkLength is not evenly divisible by chunkSize, the back element of this range will contain fewer than chunkSize elements.

If Source is a forward range, the resulting range will be forward ranges as well. Otherwise, the resulting chunks will be input ranges consuming the same input: iterating over front will shrink the chunk such that subsequent invocations of front will no longer return the full chunk, and calling popFront on the outer range will invalidate any lingering references to previous values of front.

Parameters:

Source source	Range from which the chunks will be selected
size_t chunkSize	Chunk size

See Also:

slide

Returns:

Range of chunks.

Examples:

import std.algorithm.comparison : equal;
auto source = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10];
auto chunks = chunks(source, 4);
writeln(chunks[0]); // [1, 2, 3, 4]
writeln(chunks[1]); // [5, 6, 7, 8]
writeln(chunks[2]); // [9, 10]
writeln(chunks.back); // chunks[2]
writeln(chunks.front); // chunks[0]
writeln(chunks.length); // 3
assert(equal(retro(array(chunks)), array(retro(chunks))));

Examples:

Non-forward input ranges are supported, but with limited semantics.

import std.algorithm.comparison : equal;

int i;

// The generator doesn't save state, so it cannot be a forward range.
auto inputRange = generate!(() => ++i).take(10);

// We can still process it in chunks, but it will be single-pass only.
auto chunked = inputRange.chunks(2);

assert(chunked.front.equal([1, 2]));
assert(chunked.front.empty); // Iterating the chunk has consumed it
chunked.popFront;
assert(chunked.front.equal([3, 4]));

this(Source source, size_t chunkSize);

Standard constructor

@property auto front();

void popFront();

@property bool empty();

Input range primitives. Always present.

@property typeof(this) save();

Forward range primitives. Only present if Source is a forward range.

@property size_t length();

Length. Only if hasLength!Source is true

auto opIndex(size_t index);

typeof(this) opSlice(size_t lower, size_t upper);

Indexing and slicing operations. Provided only if hasSlicing!Source is true.

@property auto back();

void popBack();

Bidirectional range primitives. Provided only if both hasSlicing!Source and hasLength!Source are true.

struct EvenChunks(Source) if (isForwardRange!Source && hasLength!Source);

EvenChunks!Source evenChunks(Source)(Source source, size_t chunkCount)
if (isForwardRange!Source && hasLength!Source);

This range splits a source range into chunkCount chunks of approximately equal length. Source must be a forward range with known length.

Unlike chunks, evenChunks takes a chunk count (not size). The returned range will contain zero or more source.length / chunkCount + 1 elements followed by source.length / chunkCount elements. If source.length < chunkCount, some chunks will be empty.

chunkCount must not be zero, unless source is also empty.

Examples:

import std.algorithm.comparison : equal;
auto source = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10];
auto chunks = evenChunks(source, 3);
writeln(chunks[0]); // [1, 2, 3, 4]
writeln(chunks[1]); // [5, 6, 7]
writeln(chunks[2]); // [8, 9, 10]

this(Source source, size_t chunkCount);

Standard constructor

@property auto front();

void popFront();

@property bool empty();

@property typeof(this) save();

Forward range primitives. Always present.

const @property size_t length();

Length

auto opIndex(size_t index);

typeof(this) opSlice(size_t lower, size_t upper);

@property auto back();

void popBack();

Indexing, slicing and bidirectional operations and range primitives. Provided only if hasSlicing!Source is true.

auto slide(Flag!"withPartial" f = Yes.withPartial, Source)(Source source, size_t windowSize, size_t stepSize = 1)
if (isForwardRange!Source);

A fixed-sized sliding window iteration of size windowSize over a source range by a custom stepSize.

The Source range must be at least a ForwardRange and the windowSize must be greater than zero.

For windowSize = 1 it splits the range into single element groups (aka unflatten) For windowSize = 2 it is similar to zip(source, source.save.dropOne).

Parameters:

f	Whether the last element has fewer elements than windowSize it should be be ignored (No.withPartial) or added (Yes.withPartial)
Source source	Range from which the slide will be selected
size_t windowSize	Sliding window size
size_t stepSize	Steps between the windows (by default 1)

Returns:

Range of all sliding windows with propagated bi-directionality, forwarding, random access, and slicing.

Note To avoid performance overhead, bi-directionality is only available when std.range.primitives.hasSlicing and std.range.primitives.hasLength are true.

See Also:

chunks

Examples:

Iterate over ranges with windows

import std.algorithm.comparison : equal;

assert([0, 1, 2, 3].slide(2).equal!equal(
    [[0, 1], [1, 2], [2, 3]]
));

assert(5.iota.slide(3).equal!equal(
    [[0, 1, 2], [1, 2, 3], [2, 3, 4]]
));

Examples:

set a custom stepsize (default 1)

import std.algorithm.comparison : equal;

assert(6.iota.slide(1, 2).equal!equal(
    [[0], [2], [4]]
));

assert(6.iota.slide(2, 4).equal!equal(
    [[0, 1], [4, 5]]
));

assert(iota(7).slide(2, 2).equal!equal(
    [[0, 1], [2, 3], [4, 5], [6]]
));

assert(iota(12).slide(2, 4).equal!equal(
    [[0, 1], [4, 5], [8, 9]]
));

Examples:

Allow the last slide to have fewer elements than windowSize

import std.algorithm.comparison : equal;

assert(3.iota.slide!(No.withPartial)(4).empty);
assert(3.iota.slide!(Yes.withPartial)(4).equal!equal(
    [[0, 1, 2]]
));

Examples:

Count all the possible substrings of length 2

import std.algorithm.iteration : each;

int[dstring] d;
"AGAGA"d.slide!(Yes.withPartial)(2).each!(a => d[a]++);
writeln(d); // ["AG"d:2, "GA"d:2]

Examples:

withPartial only has an effect if last element in the range doesn't have the full size

import std.algorithm.comparison : equal;

assert(5.iota.slide!(Yes.withPartial)(3, 4).equal!equal([[0, 1, 2], [4]]));
assert(6.iota.slide!(Yes.withPartial)(3, 4).equal!equal([[0, 1, 2], [4, 5]]));
assert(7.iota.slide!(Yes.withPartial)(3, 4).equal!equal([[0, 1, 2], [4, 5, 6]]));

assert(5.iota.slide!(No.withPartial)(3, 4).equal!equal([[0, 1, 2]]));
assert(6.iota.slide!(No.withPartial)(3, 4).equal!equal([[0, 1, 2]]));
assert(7.iota.slide!(No.withPartial)(3, 4).equal!equal([[0, 1, 2], [4, 5, 6]]));

auto only(Values...)(return scope Values values)
if (!is(CommonType!Values == void));

auto only()();

Assemble values into a range that carries all its elements in-situ.

Useful when a single value or multiple disconnected values must be passed to an algorithm expecting a range, without having to perform dynamic memory allocation.

As copying the range means copying all elements, it can be safely returned from functions. For the same reason, copying the returned range may be expensive for a large number of arguments.

Parameters:

Values values

the values to assemble together

Returns:

A RandomAccessRange of the assembled values.

See Also:

chain to chain ranges

Examples:

import std.algorithm.comparison : equal;
import std.algorithm.iteration : filter, joiner, map;
import std.algorithm.searching : findSplitBefore;
import std.uni : isUpper;

assert(equal(only('♡'), "♡"));
writeln([1, 2, 3, 4].findSplitBefore(only(3))[0]); // [1, 2]

assert(only("one", "two", "three").joiner(" ").equal("one two three"));

string title = "The D Programming Language";
assert(title
    .filter!isUpper // take the upper case letters
    .map!only       // make each letter its own range
    .joiner(".")    // join the ranges together lazily
    .equal("T.D.P.L"));

auto enumerate(Enumerator = size_t, Range)(Range range, Enumerator start = 0)
if (isIntegral!Enumerator && isInputRange!Range);

Iterate over range with an attached index variable.

Each element is a std.typecons.Tuple containing the index and the element, in that order, where the index member is named index and the element member is named value.

The index starts at start and is incremented by one on every iteration.

Overflow If range has length, then it is an error to pass a value for start so that start + range.length is bigger than Enumerator.max, thus it is ensured that overflow cannot happen.

If range does not have length, and popFront is called when front.index == Enumerator.max, the index will overflow and continue from Enumerator.min.

Parameters:

Range range	the input range to attach indexes to
Enumerator start	the number to start the index counter from

Returns:

At minimum, an input range. All other range primitives are given in the resulting range if range has them. The exceptions are the bidirectional primitives, which are propagated only if range has length.

Example Useful for using foreach with an index loop variable:

    import std.stdio : stdin, stdout;
    import std.range : enumerate;

    foreach (lineNum, line; stdin.byLine().enumerate(1))
        stdout.writefln("line #%s: %s", lineNum, line);

Examples:

Can start enumeration from a negative position:

import std.array : assocArray;
import std.range : enumerate;

bool[int] aa = true.repeat(3).enumerate(-1).assocArray();
assert(aa[-1]);
assert(aa[0]);
assert(aa[1]);

enum auto isTwoWayCompatible(alias fn, T1, T2);

Returns true if fn accepts variables of type T1 and T2 in any order. The following code should compile:

(ref T1 a, ref T2 b)
{
  fn(a, b);
  fn(b, a);
}

Examples:

void func1(int a, int b);
void func2(int a, float b);

static assert(isTwoWayCompatible!(func1, int, int));
static assert(isTwoWayCompatible!(func1, short, int));
static assert(!isTwoWayCompatible!(func2, int, float));

void func3(ref int a, ref int b);
static assert( isTwoWayCompatible!(func3, int, int));
static assert(!isTwoWayCompatible!(func3, short, int));

enum SearchPolicy: int;

Policy used with the searching primitives lowerBound, upperBound, and equalRange of SortedRange below.

Examples:

import std.algorithm.comparison : equal;

auto a = assumeSorted([0, 1, 2, 3, 4, 5, 6, 7, 8, 9]);
auto p1 = a.upperBound!(SearchPolicy.binarySearch)(3);
assert(p1.equal([4, 5, 6, 7, 8, 9]));

auto p2 = a.lowerBound!(SearchPolicy.gallop)(4);
assert(p2.equal([0, 1, 2, 3]));

linear

Searches in a linear fashion.

trot

Searches with a step that is grows linearly (1, 2, 3,...) leading to a quadratic search schedule (indexes tried are 0, 1, 3, 6, 10, 15, 21, 28,...) Once the search overshoots its target, the remaining interval is searched using binary search. The search is completed in Ο(sqrt(n)) time. Use it when you are reasonably confident that the value is around the beginning of the range.

gallop

Performs a galloping search algorithm, i.e. searches with a step that doubles every time, (1, 2, 4, 8, ...) leading to an exponential search schedule (indexes tried are 0, 1, 3, 7, 15, 31, 63,...) Once the search overshoots its target, the remaining interval is searched using binary search. A value is found in Ο(log(n)) time.

binarySearch

Searches using a classic interval halving policy. The search starts in the middle of the range, and each search step cuts the range in half. This policy finds a value in Ο(log(n)) time but is less cache friendly than gallop for large ranges. The binarySearch policy is used as the last step of trot, gallop, trotBackwards, and gallopBackwards strategies.

trotBackwards

Similar to trot but starts backwards. Use it when confident that the value is around the end of the range.

gallopBackwards

Similar to gallop but starts backwards. Use it when confident that the value is around the end of the range.

enum SortedRangeOptions: int;

Options for SortedRange ranges (below).

Examples:

// create a SortedRange, that's checked strictly
SortedRange!(int[],"a < b", SortedRangeOptions.checkStrictly)([ 1, 3, 5, 7, 9 ]);

assumeSorted

Assume, that the range is sorted without checking.

checkStrictly

All elements of the range are checked to be sorted. The check is performed in O(n) time.

checkRoughly

Some elements of the range are checked to be sorted. For ranges with random order, this will almost surely detect, that it is not sorted. For almost sorted ranges it's more likely to fail. The checked elements are choosen in a deterministic manner, which makes this check reproducable. The check is performed in O(log(n)) time.

struct SortedRange(Range, alias pred = "a < b", SortedRangeOptions opt = SortedRangeOptions.assumeSorted) if (isInputRange!Range && !isInstanceOf!(SortedRange, Range));

template SortedRange(Range, alias pred = "a < b", SortedRangeOptions opt = SortedRangeOptions.assumeSorted) if (isInstanceOf!(SortedRange, Range))

Represents a sorted range. In addition to the regular range primitives, supports additional operations that take advantage of the ordering, such as merge and binary search. To obtain a SortedRange from an unsorted range r, use std.algorithm.sorting.sort which sorts r in place and returns the corresponding SortedRange. To construct a SortedRange from a range r that is known to be already sorted, use assumeSorted.

Parameters:

Examples:

import std.algorithm.sorting : sort;
auto a = [ 1, 2, 3, 42, 52, 64 ];
auto r = assumeSorted(a);
assert(r.contains(3));
assert(!(32 in r));
auto r1 = sort!"a > b"(a);
assert(3 in r1);
assert(!r1.contains(32));
writeln(r1.release()); // [64, 52, 42, 3, 2, 1]

Examples:

SortedRange could accept ranges weaker than random-access, but it is unable to provide interesting functionality for them. Therefore, SortedRange is currently restricted to random-access ranges.

No copy of the original range is ever made. If the underlying range is changed concurrently with its corresponding SortedRange in ways that break its sorted-ness, SortedRange will work erratically.

import std.algorithm.mutation : swap;
auto a = [ 1, 2, 3, 42, 52, 64 ];
auto r = assumeSorted(a);
assert(r.contains(42));
swap(a[3], a[5]);         // illegal to break sortedness of original range
assert(!r.contains(42));  // passes although it shouldn't

Examples:

SortedRange can be searched with predicates that do not take two elements of the underlying range as arguments.

This is useful, if a range of structs is sorted by a member and you want to search in that range by only providing a value for that member.

import std.algorithm.comparison : equal;
static struct S { int i; }
static bool byI(A, B)(A a, B b)
{
    static if (is(A == S))
        return a.i < b;
    else
        return a < b.i;
}
auto r = assumeSorted!byI([S(1), S(2), S(3)]);
auto lessThanTwo = r.lowerBound(2);
assert(equal(lessThanTwo, [S(1)]));

@property bool empty();

@property auto save();

@property ref auto front();

void popFront();

@property ref auto back();

void popBack();

ref auto opIndex(size_t i);

scope auto opSlice(size_t a, size_t b) return;

Range primitives.

scope auto release() return;

Releases the controlled range and returns it.

This does the opposite of assumeSorted: instead of turning a range into a SortedRange, it extracts the original range back out of the SortedRange using move.std.algorithm.mutation.

Examples:

import std.algorithm.sorting : sort;
int[3] data = [ 1, 2, 3 ];
auto a = assumeSorted(data[]);
writeln(a); // sort!"a < b"(data[])
int[] p = a.release();
writeln(p); // [1, 2, 3]

auto lowerBound(SearchPolicy sp = SearchPolicy.binarySearch, V)(V value)
if (isTwoWayCompatible!(predFun, ElementType!Range, V) && hasSlicing!Range);

This function uses a search with policy sp to find the largest left subrange on which pred(x, value) is true for all x (e.g., if pred is "less than", returns the portion of the range with elements strictly smaller than value). The search schedule and its complexity are documented in SearchPolicy.

Examples:

import std.algorithm.comparison : equal;
auto a = assumeSorted([ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 ]);
auto p = a.lowerBound(4);
assert(equal(p, [ 0, 1, 2, 3 ]));

auto upperBound(SearchPolicy sp = SearchPolicy.binarySearch, V)(V value)
if (isTwoWayCompatible!(predFun, ElementType!Range, V));

This function searches with policy sp to find the largest right subrange on which pred(value, x) is true for all x (e.g., if pred is "less than", returns the portion of the range with elements strictly greater than value). The search schedule and its complexity are documented in SearchPolicy.

For ranges that do not offer random access, SearchPolicy.linear is the only policy allowed (and it must be specified explicitly lest it exposes user code to unexpected inefficiencies). For random-access searches, all policies are allowed, and SearchPolicy.binarySearch is the default.

Examples:

import std.algorithm.comparison : equal;
auto a = assumeSorted([ 1, 2, 3, 3, 3, 4, 4, 5, 6 ]);
auto p = a.upperBound(3);
assert(equal(p, [4, 4, 5, 6]));

auto equalRange(V)(V value)
if (isTwoWayCompatible!(predFun, ElementType!Range, V) && isRandomAccessRange!Range);

Returns the subrange containing all elements e for which both pred(e, value) and pred(value, e) evaluate to false (e.g., if pred is "less than", returns the portion of the range with elements equal to value). Uses a classic binary search with interval halving until it finds a value that satisfies the condition, then uses SearchPolicy.gallopBackwards to find the left boundary and SearchPolicy.gallop to find the right boundary. These policies are justified by the fact that the two boundaries are likely to be near the first found value (i.e., equal ranges are relatively small). Completes the entire search in Ο(log(n)) time.

Examples:

import std.algorithm.comparison : equal;
auto a = [ 1, 2, 3, 3, 3, 4, 4, 5, 6 ];
auto r = a.assumeSorted.equalRange(3);
assert(equal(r, [ 3, 3, 3 ]));

auto trisect(V)(V value)
if (isTwoWayCompatible!(predFun, ElementType!Range, V) && isRandomAccessRange!Range && hasLength!Range);

Returns a tuple r such that r[0] is the same as the result of lowerBound(value), r[1] is the same as the result of equalRange(value), and r[2] is the same as the result of upperBound(value). The call is faster than computing all three separately. Uses a search schedule similar to equalRange. Completes the entire search in Ο(log(n)) time.

Examples:

import std.algorithm.comparison : equal;
auto a = [ 1, 2, 3, 3, 3, 4, 4, 5, 6 ];
auto r = assumeSorted(a).trisect(3);
assert(equal(r[0], [ 1, 2 ]));
assert(equal(r[1], [ 3, 3, 3 ]));
assert(equal(r[2], [ 4, 4, 5, 6 ]));

bool contains(V)(V value)
if (isRandomAccessRange!Range);

Returns true if and only if value can be found in range, which is assumed to be sorted. Performs Ο(log(r.length)) evaluations of pred.

bool opBinaryRight(string op, V)(V value)
if (op == "in" && isRandomAccessRange!Range);

Like contains, but the value is specified before the range.

auto groupBy()();

Returns a range of subranges of elements that are equivalent according to the sorting relation.

auto assumeSorted(alias pred = "a < b", R)(R r)
if (isInputRange!(Unqual!R));

Assumes r is sorted by predicate pred and returns the corresponding SortedRange!(pred, R) having r as support. To check for sorted-ness at cost Ο(n), use std.algorithm.sorting.isSorted.

Examples:

import std.algorithm.comparison : equal;

int[] a = [0, 1, 2, 3, 4, 5, 6, 7, 8, 9];
auto p = assumeSorted(a);

assert(equal(p.lowerBound(4), [0, 1, 2, 3]));
assert(equal(p.lowerBound(5), [0, 1, 2, 3, 4]));
assert(equal(p.lowerBound(6), [0, 1, 2, 3, 4, 5]));
assert(equal(p.lowerBound(6.9), [0, 1, 2, 3, 4, 5, 6]));

struct RefRange(R) if (isInputRange!R);

auto refRange(R)(R* range)
if (isInputRange!R);

Wrapper which effectively makes it possible to pass a range by reference. Both the original range and the RefRange will always have the exact same elements. Any operation done on one will affect the other. So, for instance, if it's passed to a function which would implicitly copy the original range if it were passed to it, the original range is not copied but is consumed as if it were a reference type.

Note save works as normal and operates on a new range, so if save is ever called on the RefRange, then no operations on the saved range will affect the original.

Parameters:

R* range

the range to construct the RefRange from

Returns:

A RefRange. If the given range is a class type (and thus is already a reference type), then the original range is returned rather than a RefRange.

Examples:

Basic Example

import std.algorithm.searching : find;
ubyte[] buffer = [1, 9, 45, 12, 22];
auto found1 = find(buffer, 45);
writeln(found1); // [45, 12, 22]
writeln(buffer); // [1, 9, 45, 12, 22]

auto wrapped1 = refRange(&buffer);
auto found2 = find(wrapped1, 45);
writeln(*found2.ptr); // [45, 12, 22]
writeln(buffer); // [45, 12, 22]

auto found3 = find(wrapped1.save, 22);
writeln(*found3.ptr); // [22]
writeln(buffer); // [45, 12, 22]

string str = "hello world";
auto wrappedStr = refRange(&str);
writeln(str.front); // 'h'
str.popFrontN(5);
writeln(str); // " world"
writeln(wrappedStr.front); // ' '
writeln(*wrappedStr.ptr); // " world"

Examples:

opAssign Example.

ubyte[] buffer1 = [1, 2, 3, 4, 5];
ubyte[] buffer2 = [6, 7, 8, 9, 10];
auto wrapped1 = refRange(&buffer1);
auto wrapped2 = refRange(&buffer2);
assert(wrapped1.ptr is &buffer1);
assert(wrapped2.ptr is &buffer2);
assert(wrapped1.ptr !is wrapped2.ptr);
assert(buffer1 != buffer2);

wrapped1 = wrapped2;

//Everything points to the same stuff as before.
assert(wrapped1.ptr is &buffer1);
assert(wrapped2.ptr is &buffer2);
assert(wrapped1.ptr !is wrapped2.ptr);

//But buffer1 has changed due to the assignment.
writeln(buffer1); // [6, 7, 8, 9, 10]
writeln(buffer2); // [6, 7, 8, 9, 10]

buffer2 = [11, 12, 13, 14, 15];

//Everything points to the same stuff as before.
assert(wrapped1.ptr is &buffer1);
assert(wrapped2.ptr is &buffer2);
assert(wrapped1.ptr !is wrapped2.ptr);

//But buffer2 has changed due to the assignment.
writeln(buffer1); // [6, 7, 8, 9, 10]
writeln(buffer2); // [11, 12, 13, 14, 15]

wrapped2 = null;

//The pointer changed for wrapped2 but not wrapped1.
assert(wrapped1.ptr is &buffer1);
assert(wrapped2.ptr is null);
assert(wrapped1.ptr !is wrapped2.ptr);

//buffer2 is not affected by the assignment.
writeln(buffer1); // [6, 7, 8, 9, 10]
writeln(buffer2); // [11, 12, 13, 14, 15]

pure nothrow @safe this(R* range);

auto opAssign(RefRange rhs);

This does not assign the pointer of rhs to this RefRange. Rather it assigns the range pointed to by rhs to the range pointed to by this RefRange. This is because any operation on a RefRange is the same is if it occurred to the original range. The one exception is when a RefRange is assigned null either directly or because rhs is null. In that case, RefRange no longer refers to the original range but is null.

void opAssign(typeof(null) rhs);

inout pure nothrow @property @safe inout(R*) ptr();

A pointer to the wrapped range.

@property auto front();

const @property auto front();

@property auto front(ElementType!R value);

@property bool empty();

const @property bool empty();

void popFront();

@property auto save();

const @property auto save();

auto opSlice();

const auto opSlice();

Only defined if isForwardRange!R is true.

@property auto back();

const @property auto back();

@property auto back(ElementType!R value);

void popBack();

Only defined if isBidirectionalRange!R is true.

ref auto opIndex(IndexType)(IndexType index);

const ref auto opIndex(IndexType)(IndexType index);

Only defined if isRandomAccessRange!R is true.

auto moveFront();

Only defined if hasMobileElements!R and isForwardRange!R are true.

auto moveBack();

Only defined if hasMobileElements!R and isBidirectionalRange!R are true.

auto moveAt(size_t index);

Only defined if hasMobileElements!R and isRandomAccessRange!R are true.

@property size_t length();

const @property size_t length();

alias opDollar = length;

Only defined if hasLength!R is true.

auto opSlice(IndexType1, IndexType2)(IndexType1 begin, IndexType2 end);

const auto opSlice(IndexType1, IndexType2)(IndexType1 begin, IndexType2 end);

Only defined if hasSlicing!R is true.

auto bitwise(R)(auto ref R range)
if (isInputRange!R && isIntegral!(ElementType!R));

Bitwise adapter over an integral type range. Consumes the range elements bit by bit, from the least significant bit to the most significant bit.

Parameters:

R	an integral input range to iterate over
R range	range to consume bit by by

Returns:

A Bitwise input range with propagated forward, bidirectional and random access capabilities

Examples:

import std.algorithm.comparison : equal;
import std.format : format;

// 00000011 00001001
ubyte[] arr = [3, 9];
auto r = arr.bitwise;

// iterate through it as with any other range
writeln(format("%(%d%)", r)); // "1100000010010000"
assert(format("%(%d%)", r.retro).equal("1100000010010000".retro));

auto r2 = r[5 .. $];
// set a bit
r[2] = 1;
writeln(arr[0]); // 7
writeln(r[5]); // r2[0]

Examples:

You can use bitwise to implement an uniform bool generator

import std.algorithm.comparison : equal;
import std.random : rndGen;

auto rb = rndGen.bitwise;
static assert(isInfinite!(typeof(rb)));

auto rb2 = rndGen.bitwise;
// Don't forget that structs are passed by value
assert(rb.take(10).equal(rb2.take(10)));

struct NullSink;

ref auto nullSink();

An OutputRange that discards the data it receives.

Examples:

import std.algorithm.iteration : map;
import std.algorithm.mutation : copy;
[4, 5, 6].map!(x => x * 2).copy(nullSink); // data is discarded

Examples:

import std.csv : csvNextToken;

string line = "a,b,c";

// ignore the first column
line.csvNextToken(nullSink, ',', '"');
line.popFront;

// look at the second column
Appender!string app;
line.csvNextToken(app, ',', '"');
writeln(app.data); // "b"

auto tee(Flag!"pipeOnPop" pipeOnPop = Yes.pipeOnPop, R1, R2)(R1 inputRange, R2 outputRange)
if (isInputRange!R1 && isOutputRange!(R2, ElementType!R1));

auto tee(alias fun, Flag!"pipeOnPop" pipeOnPop = Yes.pipeOnPop, R1)(R1 inputRange)
if (is(typeof(fun) == void) || isSomeFunction!fun);

Implements a "tee" style pipe, wrapping an input range so that elements of the range can be passed to a provided function or OutputRange as they are iterated over. This is useful for printing out intermediate values in a long chain of range code, performing some operation with side-effects on each call to front or popFront, or diverting the elements of a range into an auxiliary OutputRange.

It is important to note that as the resultant range is evaluated lazily, in the case of the version of tee that takes a function, the function will not actually be executed until the range is "walked" using functions that evaluate ranges, such as std.array.array or std.algorithm.iteration.fold.

Parameters:

pipeOnPop	If Yes.pipeOnPop, simply iterating the range without ever calling front is enough to have tee mirror elements to outputRange (or, respectively, fun). Note that each popFront() call will mirror the old front value, not the new one. This means that the last value will not be forwarded if the range isn't iterated until empty. If No.pipeOnPop, only elements for which front does get called will be also sent to outputRange/fun. If front is called twice for the same element, it will still be sent only once. If this caching is undesired, consider using std.algorithm.iteration.map instead.
R1 inputRange	The input range being passed through.
R2 outputRange	This range will receive elements of inputRange progressively as iteration proceeds.
fun	This function will be called with elements of inputRange progressively as iteration proceeds.

Returns:

An input range that offers the elements of inputRange. Regardless of whether inputRange is a more powerful range (forward, bidirectional etc), the result is always an input range. Reading this causes inputRange to be iterated and returns its elements in turn. In addition, the same elements will be passed to outputRange or fun as well.

See Also:

std.algorithm.iteration.each

Examples:

import std.algorithm.comparison : equal;
import std.algorithm.iteration : filter, map;

// Sum values while copying
int[] values = [1, 4, 9, 16, 25];
int sum = 0;
auto newValues = values.tee!(a => sum += a).array;
assert(equal(newValues, values));
writeln(sum); // 1 + 4 + 9 + 16 + 25

// Count values that pass the first filter
int count = 0;
auto newValues4 = values.filter!(a => a < 10)
                        .tee!(a => count++)
                        .map!(a => a + 1)
                        .filter!(a => a < 10);

//Fine, equal also evaluates any lazy ranges passed to it.
//count is not 3 until equal evaluates newValues4
assert(equal(newValues4, [2, 5]));
writeln(count); // 3

auto padLeft(R, E)(R r, E e, size_t n)
if ((isInputRange!R && hasLength!R || isForwardRange!R) && !is(CommonType!(ElementType!R, E) == void));

Extends the length of the input range r by padding out the start of the range with the element e. The element e must be of a common type with the element type of the range r as defined by std.traits.CommonType. If n is less than the length of of r, then r is returned unmodified.

If r is a string with Unicode characters in it, padLeft follows D's rules about length for strings, which is not the number of characters, or graphemes, but instead the number of encoding units. If you want to treat each grapheme as only one encoding unit long, then call std.uni.byGrapheme before calling this function.

If r has a length, then this is Ο(1). Otherwise, it's Ο(r.length).

Parameters:

R r	an input range with a length, or a forward range
E e	element to pad the range with
size_t n	the length to pad to

Returns:

A range containing the elements of the original range with the extra padding

See Also: std.string.leftJustifier

Examples:

import std.algorithm.comparison : equal;

assert([1, 2, 3, 4].padLeft(0, 6).equal([0, 0, 1, 2, 3, 4]));
assert([1, 2, 3, 4].padLeft(0, 3).equal([1, 2, 3, 4]));

assert("abc".padLeft('_', 6).equal("___abc"));

auto padRight(R, E)(R r, E e, size_t n)
if (isInputRange!R && !isInfinite!R && !is(CommonType!(ElementType!R, E) == void));

Extend the length of the input range r by padding out the end of the range with the element e. The element e must be of a common type with the element type of the range r as defined by std.traits.CommonType. If n is less than the length of of r, then the contents of r are returned.

The range primitives that the resulting range provides depends whether or not r provides them. Except the functions back and popBack, which also require the range to have a length as well as back and popBack

Parameters:

R r	an input range with a length
E e	element to pad the range with
size_t n	the length to pad to

Returns:

A range containing the elements of the original range with the extra padding

See Also: std.string.rightJustifier

Examples:

import std.algorithm.comparison : equal;

assert([1, 2, 3, 4].padRight(0, 6).equal([1, 2, 3, 4, 0, 0]));
assert([1, 2, 3, 4].padRight(0, 4).equal([1, 2, 3, 4]));

assert("abc".padRight('_', 6).equal("abc___"));

enum auto isSomeFiniteCharInputRange(R);

This simplifies a commonly used idiom in phobos for accepting any kind of string parameter. The type R can for example be a simple string, chained string using std.range.chain, std.path.chainPath or any other input range of characters.

Only finite length character ranges are allowed with this constraint.

This template is equivalent to:

isInputRange!R && !isInfinite!R && isSomeChar!(ElementEncodingType!R)

See Also:

std.range.primitives.isInputRange, std.range.primitives.isInfinite, isSomeChar, std.range.primitives.ElementEncodingType

Examples:

import std.path : chainPath;
import std.range : chain;

void someLibraryMethod(R)(R argument)
if (isSomeFiniteCharInputRange!R)
{
    // implementation detail, would iterate over each character of argument
}

someLibraryMethod("simple strings work");
someLibraryMethod(chain("chained", " ", "strings", " ", "work"));
someLibraryMethod(chainPath("chained", "paths", "work"));
// you can also use custom structs implementing a char range