std.math

enum real E;

e = 2.718281...

enum real LOG2T;

log₂10 = 3.321928...

enum real LOG2E;

log₂e = 1.442695...

enum real LOG2;

log₁₀2 = 0.301029...

enum real LOG10E;

log₁₀e = 0.434294...

enum real LN2;

ln 2 = 0.693147...

enum real LN10;

ln 10 = 2.302585...

enum real PI;

π = 3.141592...

enum real PI_2;

π / 2 = 1.570796...

enum real PI_4;

π / 4 = 0.785398...

enum real M_1_PI;

1 / π = 0.318309...

enum real M_2_PI;

2 / π = 0.636619...

enum real M_2_SQRTPI;

2 / √π = 1.128379...

enum real SQRT2;

√2 = 1.414213...

enum real SQRT1_2;

√½ = 0.707106...

pure nothrow @safe Num abs(Num)(Num x)
if (is(typeof(Num.init >= 0)) && is(typeof(-Num.init)) && !(is(Num* : const(ifloat*)) || is(Num* : const(idouble*)) || is(Num* : const(ireal*))));

pure nothrow @nogc @safe auto abs(Num)(Num z)
if (is(Num* : const(cfloat*)) || is(Num* : const(cdouble*)) || is(Num* : const(creal*)));

pure nothrow @nogc @safe auto abs(Num)(Num y)
if (is(Num* : const(ifloat*)) || is(Num* : const(idouble*)) || is(Num* : const(ireal*)));

Calculates the absolute value of a number

Parameters:

Num	(template parameter) type of number
Num x	real number value
Num z	complex number value
Num y	imaginary number value

Returns:

The absolute value of the number. If floating-point or integral, the return type will be the same as the input; if complex or imaginary, the returned value will be the corresponding floating point type.

For complex numbers, abs(z) = sqrt( z.re² + z.im² ) = hypot(z.re, z.im).

Examples:

ditto

assert(isIdentical(abs(-0.0L), 0.0L));
assert(isNaN(abs(real.nan)));
assert(abs(-real.infinity) == real.infinity);
assert(abs(-3.2Li) == 3.2L);
assert(abs(71.6Li) == 71.6L);
assert(abs(-56) == 56);
assert(abs(2321312L)  == 2321312L);
assert(abs(-1L+1i) == sqrt(2.0L));

pure nothrow @nogc @safe auto conj(Num)(Num z)
if (is(Num* : const(cfloat*)) || is(Num* : const(cdouble*)) || is(Num* : const(creal*)));

pure nothrow @nogc @safe auto conj(Num)(Num y)
if (is(Num* : const(ifloat*)) || is(Num* : const(idouble*)) || is(Num* : const(ireal*)));

Complex conjugate

conj(x + iy) = x - iy

Note that z * conj(z) = z.re² - z.im² is always a real number

Examples:

creal c = 7 + 3Li;
assert(conj(c) == 7-3Li);
ireal z = -3.2Li;
assert(conj(z) == -z);

pure nothrow @nogc @safe real cos(real x);

pure nothrow @nogc @safe double cos(double x);

pure nothrow @nogc @safe float cos(float x);

Returns cosine of x. x is in radians.

Special Values

x	cos(x)	invalid?
NAN	NAN	yes
±∞	NAN	yes

Bugs:

Results are undefined if |x| >= 2⁶⁴.

pure nothrow @nogc @safe real sin(real x);

pure nothrow @nogc @safe double sin(double x);

pure nothrow @nogc @safe float sin(float x);

Returns sine of x. x is in radians.

Special Values

x	sin(x)	invalid?
NAN	NAN	yes
±0.0	±0.0	no
±∞	NAN	yes

Parameters:

real x

angle in radians (not degrees)

Returns:

sine of x

See Also:

cos , tan , asin 

Bugs:

Results are undefined if |x| >= 2⁶⁴.

Examples:

import std.math : sin, PI;
import std.stdio : writefln;

void someFunc()
{
  real x = 30.0;
  auto result = sin(x * (PI / 180)); // convert degrees to radians
  writefln("The sine of %s degrees is %s", x, result);
}

pure nothrow @nogc @safe creal sin(creal z);

pure nothrow @nogc @safe ireal sin(ireal y);

Returns sine for complex and imaginary arguments.

sin(z) = sin(z.re)*cosh(z.im) + cos(z.re)*sinh(z.im)i

If both sin(θ) and cos(θ) are required, it is most efficient to use expi(θ).

Examples:

assert(sin(0.0+0.0i) == 0.0);
assert(sin(2.0+0.0i) == sin(2.0L) );

pure nothrow @nogc @safe creal cos(creal z);

pure nothrow @nogc @safe real cos(ireal y);

cosine, complex and imaginary

cos(z) = cos(z.re)*cosh(z.im) - sin(z.re)*sinh(z.im)i

Examples:

assert(cos(0.0+0.0i)==1.0);
assert(cos(1.3L+0.0i)==cos(1.3L));
assert(cos(5.2Li)== cosh(5.2L));

pure nothrow @nogc @trusted real tan(real x);

Returns tangent of x. x is in radians.

Special Values

x	tan(x)	invalid?
NAN	NAN	yes
±0.0	±0.0	no
±∞	NAN	yes

pure nothrow @nogc @safe real acos(real x);

pure nothrow @nogc @safe double acos(double x);

pure nothrow @nogc @safe float acos(float x);

Calculates the arc cosine of x, returning a value ranging from 0 to π.

Special Values

x	acos(x)	invalid?
>1.0	NAN	yes
<-1.0	NAN	yes
NAN	NAN	yes

pure nothrow @nogc @safe real asin(real x);

pure nothrow @nogc @safe double asin(double x);

pure nothrow @nogc @safe float asin(float x);

Calculates the arc sine of x, returning a value ranging from -π/2 to π/2.

Special Values

x	asin(x)	invalid?
±0.0	±0.0	no
>1.0	NAN	yes
<-1.0	NAN	yes

pure nothrow @nogc @safe real atan(real x);

pure nothrow @nogc @safe double atan(double x);

pure nothrow @nogc @safe float atan(float x);

Calculates the arc tangent of x, returning a value ranging from -π/2 to π/2.

Special Values

x	atan(x)	invalid?
±0.0	±0.0	no
±∞	NAN	yes

pure nothrow @nogc @trusted real atan2(real y, real x);

pure nothrow @nogc @safe double atan2(double y, double x);

pure nothrow @nogc @safe float atan2(float y, float x);

Calculates the arc tangent of y / x, returning a value ranging from -π to π.

Special Values

y	x	atan(y, x)
NAN	anything	NAN
anything	NAN	NAN
±0.0	>0.0	±0.0
±0.0	+0.0	±0.0
±0.0	<0.0	±π
±0.0	-0.0	±π
>0.0	±0.0	π/2
<0.0	±0.0	-π/2
>0.0	∞	±0.0
±∞	anything	±π/2
>0.0	-∞	±π
±∞	∞	±π/4
±∞	-∞	±3π/4

pure nothrow @nogc @safe real cosh(real x);

pure nothrow @nogc @safe double cosh(double x);

pure nothrow @nogc @safe float cosh(float x);

Calculates the hyperbolic cosine of x.

Special Values

x	cosh(x)	invalid?
±∞	±0.0	no

pure nothrow @nogc @safe real sinh(real x);

pure nothrow @nogc @safe double sinh(double x);

pure nothrow @nogc @safe float sinh(float x);

Calculates the hyperbolic sine of x.

Special Values

x	sinh(x)	invalid?
±0.0	±0.0	no
±∞	±∞	no

pure nothrow @nogc @safe real tanh(real x);

pure nothrow @nogc @safe double tanh(double x);

pure nothrow @nogc @safe float tanh(float x);

Calculates the hyperbolic tangent of x.

Special Values

x	tanh(x)	invalid?
±0.0	±0.0	no
±∞	±1.0	no

pure nothrow @nogc @safe real acosh(real x);

pure nothrow @nogc @safe double acosh(double x);

pure nothrow @nogc @safe float acosh(float x);

Calculates the inverse hyperbolic cosine of x.

Mathematically, acosh(x) = log(x + sqrt( x*x - 1))

Special Values

x	acosh(x)
NAN	NAN
<1	NAN
1	0
+∞	+∞

pure nothrow @nogc @safe real asinh(real x);

pure nothrow @nogc @safe double asinh(double x);

pure nothrow @nogc @safe float asinh(float x);

Calculates the inverse hyperbolic sine of x.

Mathematically,

asinh(x) =  log( x + sqrt( x*x + 1 )) // if x >= +0
asinh(x) = -log(-x + sqrt( x*x + 1 )) // if x <= -0

Special Values

x	asinh(x)
NAN	NAN
±0	±0
±∞	±∞

pure nothrow @nogc @safe real atanh(real x);

pure nothrow @nogc @safe double atanh(double x);

pure nothrow @nogc @safe float atanh(float x);

Calculates the inverse hyperbolic tangent of x, returning a value from ranging from -1 to 1.

Mathematically, atanh(x) = log( (1+x)/(1-x) ) / 2

Special Values

x	acosh(x)
NAN	NAN
±0	±0
-∞	-0

pure nothrow @nogc @safe long rndtol(real x);

pure nothrow @nogc @safe long rndtol(double x);

pure nothrow @nogc @safe long rndtol(float x);

Returns x rounded to a long value using the current rounding mode. If the integer value of x is greater than long.max, the result is indeterminate.

real rndtonl(real x);

Returns x rounded to a long value using the FE_TONEAREST rounding mode. If the integer value of x is greater than long.max, the result is indeterminate.

pure nothrow @nogc @safe float sqrt(float x);

pure nothrow @nogc @safe double sqrt(double x);

pure nothrow @nogc @safe real sqrt(real x);

Compute square root of x.

Special Values

x	sqrt(x)	invalid?
-0.0	-0.0	no
<0.0	NAN	yes
+∞	+∞	no

pure nothrow @nogc @trusted real exp(real x);

pure nothrow @nogc @safe double exp(double x);

pure nothrow @nogc @safe float exp(float x);

Calculates e^x.

Special Values

x	ex
+∞	+∞
-∞	+0.0
NAN	NAN

pure nothrow @nogc @trusted real expm1(real x);

Calculates the value of the natural logarithm base (e) raised to the power of x, minus 1.

For very small x, expm1(x) is more accurate than exp(x)-1.

Special Values

x	ex-1
±0.0	±0.0
+∞	+∞
-∞	-1.0
NAN	NAN

pure nothrow @nogc @trusted real exp2(real x);

Calculates 2^x.

Special Values

x	exp2(x)
+∞	+∞
-∞	+0.0
NAN	NAN

Examples:

assert(feqrel(exp2(0.5L), SQRT2) >= real.mant_dig -1);
assert(exp2(8.0L) == 256.0);
assert(exp2(-9.0L)== 1.0L/512.0);

pure nothrow @nogc @trusted creal expi(real y);

Calculate cos(y) + i sin(y).

On many CPUs (such as x86), this is a very efficient operation; almost twice as fast as calculating sin(y) and cos(y) separately, and is the preferred method when both are required.

Examples:

assert(expi(1.3e5L) == cos(1.3e5L) + sin(1.3e5L) * 1i);
assert(expi(0.0L) == 1L + 0.0Li);

pure nothrow @nogc @trusted T frexp(T)(const T value, out int exp)
if (isFloatingPoint!T);

Separate floating point value into significand and exponent.

Returns:

Calculate and return x and exp such that value =x*2^exp and .5 <= |x| < 1.0

x has same sign as value.

Special Values

value	returns	exp
±0.0	±0.0	0
+∞	+∞	int.max
-∞	-∞	int.min
±NAN	±NAN	int.min

Examples:

int exp;
real mantissa = frexp(123.456L, exp);

// check if values are equal to 19 decimal digits of precision
assert(equalsDigit(mantissa * pow(2.0L, cast(real)exp), 123.456L, 19));

assert(frexp(-real.nan, exp) && exp == int.min);
assert(frexp(real.nan, exp) && exp == int.min);
assert(frexp(-real.infinity, exp) == -real.infinity && exp == int.min);
assert(frexp(real.infinity, exp) == real.infinity && exp == int.max);
assert(frexp(-0.0, exp) == -0.0 && exp == 0);
assert(frexp(0.0, exp) == 0.0 && exp == 0);

pure nothrow @nogc @trusted int ilogb(T)(const T x)
if (isFloatingPoint!T);

pure nothrow @nogc @safe int ilogb(T)(const T x)
if (isIntegral!T && isUnsigned!T);

pure nothrow @nogc @safe int ilogb(T)(const T x)
if (isIntegral!T && isSigned!T);

Extracts the exponent of x as a signed integral value.

If x is not a special value, the result is the same as cast(int)logb(x).

Special Values

x	ilogb(x)	Range error?
0	FP_ILOGB0	yes
±∞	int.max	no
NAN	FP_ILOGBNAN	no

pure nothrow @nogc @safe real ldexp(real n, int exp);

pure nothrow @nogc @safe double ldexp(double n, int exp);

pure nothrow @nogc @safe float ldexp(float n, int exp);

Compute n * 2^exp

References: frexp

Examples:

import std.meta : AliasSeq;
foreach (T; AliasSeq!(float, double, real))
{
    T r;

    r = ldexp(3.0L, 3);
    assert(r == 24);

    r = ldexp(cast(T)3.0, cast(int) 3);
    assert(r == 24);

    T n = 3.0;
    int exp = 3;
    r = ldexp(n, exp);
    assert(r == 24);
}

pure nothrow @nogc @safe real log(real x);

Calculate the natural logarithm of x.

Special Values

x	log(x)	divide by 0?	invalid?
±0.0	-∞	yes	no
<0.0	NAN	no	yes
+∞	+∞	no	no

Examples:

assert(log(E) == 1);

pure nothrow @nogc @safe real log10(real x);

Calculate the base-10 logarithm of x.

Special Values

x	log10(x)	divide by 0?	invalid?
±0.0	-∞	yes	no
<0.0	NAN	no	yes
+∞	+∞	no	no

Examples:

assert(fabs(log10(1000) - 3) < .000001);

pure nothrow @nogc @safe real log1p(real x);

Calculates the natural logarithm of 1 + x.

For very small x, log1p(x) will be more accurate than log(1 + x).

Special Values

x	log1p(x)	divide by 0?	invalid?
±0.0	±0.0	no	no
-1.0	-∞	yes	no
<-1.0	NAN	no	yes
+∞	-∞	no	no

pure nothrow @nogc @safe real log2(real x);

Calculates the base-2 logarithm of x: log₂x

Special Values

x	log2(x)	divide by 0?	invalid?
±0.0	-∞	yes	no
<0.0	NAN	no	yes
+∞	+∞	no	no

Examples:

// check if values are equal to 19 decimal digits of precision
assert(equalsDigit(log2(1024.0L), 10, 19));

nothrow @nogc @trusted real logb(real x);

Extracts the exponent of x as a signed integral value.

If x is subnormal, it is treated as if it were normalized. For a positive, finite x:

1 <= x * FLT_RADIX^-logb(x) < FLT_RADIX

Special Values

x	logb(x)	divide by 0?
±∞	+∞	no
±0.0	-∞	yes

nothrow @nogc @trusted real fmod(real x, real y);

Calculates the remainder from the calculation x/y.

Returns:

The value of x - i * y, where i is the number of times that y can be completely subtracted from x. The result has the same sign as x.

Special Values

x	y	fmod(x, y)	invalid?
±0.0	not 0.0	±0.0	no
±∞	anything	NAN	yes
anything	±0.0	NAN	yes
!=±∞	±∞	x	no

nothrow @nogc @trusted real modf(real x, ref real i);

Breaks x into an integral part and a fractional part, each of which has the same sign as x. The integral part is stored in i.

Returns:

The fractional part of x.

Special Values

x	i (on input)	modf(x, i)	i (on return)
±∞	anything	±0.0	±∞

nothrow @nogc @trusted real scalbn(real x, int n);

Efficiently calculates x * 2ⁿ.

scalbn handles underflow and overflow in the same fashion as the basic arithmetic operators.

Special Values

x	scalb(x)
±∞	±∞
±0.0	±0.0

Examples:

assert(scalbn(-real.infinity, 5) == -real.infinity);

nothrow @nogc @trusted real cbrt(real x);

Calculates the cube root of x.

Special Values

x	cbrt(x)	invalid?
±0.0	±0.0	no
NAN	NAN	yes
±∞	±∞	no

pure nothrow @nogc @safe real fabs(real x);

pure nothrow @nogc @safe double fabs(double x);

pure nothrow @nogc @safe float fabs(float x);

Returns |x|

Special Values

x	fabs(x)
±0.0	+0.0
±∞	+∞

pure nothrow @nogc @safe real hypot(real x, real y);

Calculates the length of the hypotenuse of a right-angled triangle with sides of length x and y. The hypotenuse is the value of the square root of the sums of the squares of x and y:

sqrt(x² + y²)

Note that hypot(x, y), hypot(y, x) and hypot(x, -y) are equivalent.

Special Values

x	y	hypot(x, y)	invalid?
x	±0.0	|x|	no
±∞	y	+∞	no
±∞	NAN	+∞	no

pure nothrow @nogc @trusted real ceil(real x);

Returns the value of x rounded upward to the next integer (toward positive infinity).

Examples:

assert(ceil(+123.456L) == +124);
assert(ceil(-123.456L) == -123);
assert(ceil(-1.234L) == -1);
assert(ceil(-0.123L) == 0);
assert(ceil(0.0L) == 0);
assert(ceil(+0.123L) == 1);
assert(ceil(+1.234L) == 2);
assert(ceil(real.infinity) == real.infinity);
assert(isNaN(ceil(real.nan)));
assert(isNaN(ceil(real.init)));

pure nothrow @nogc @trusted real floor(real x);

Returns the value of x rounded downward to the next integer (toward negative infinity).

Examples:

assert(floor(+123.456L) == +123);
assert(floor(-123.456L) == -124);
assert(floor(-1.234L) == -2);
assert(floor(-0.123L) == -1);
assert(floor(0.0L) == 0);
assert(floor(+0.123L) == 0);
assert(floor(+1.234L) == 1);
assert(floor(real.infinity) == real.infinity);
assert(isNaN(floor(real.nan)));
assert(isNaN(floor(real.init)));

Unqual!F quantize(alias rfunc = rint, F)(const F val, const F unit)
if (is(typeof(rfunc(F.init)) : F) && isFloatingPoint!F);

Round val to a multiple of unit. rfunc specifies the rounding function to use; by default this is rint, which uses the current rounding mode.

Examples:

assert(12345.6789L.quantize(0.01L) == 12345.68L);
assert(12345.6789L.quantize!floor(0.01L) == 12345.67L);
assert(12345.6789L.quantize(22.0L) == 12342.0L);

Examples:

assert(12345.6789L.quantize(0) == 12345.6789L);
assert(12345.6789L.quantize(real.infinity).isNaN);
assert(12345.6789L.quantize(real.nan).isNaN);
assert(real.infinity.quantize(0.01L) == real.infinity);
assert(real.infinity.quantize(real.nan).isNaN);
assert(real.nan.quantize(0.01L).isNaN);
assert(real.nan.quantize(real.infinity).isNaN);
assert(real.nan.quantize(real.nan).isNaN);

Unqual!F quantize(real base, alias rfunc = rint, F, E)(const F val, const E exp)
if (is(typeof(rfunc(F.init)) : F) && isFloatingPoint!F && isIntegral!E);

Unqual!F quantize(real base, long exp = 1, alias rfunc = rint, F)(const F val)
if (is(typeof(rfunc(F.init)) : F) && isFloatingPoint!F);

Round val to a multiple of pow(base, exp). rfunc specifies the rounding function to use; by default this is rint, which uses the current rounding mode.

Examples:

assert(12345.6789L.quantize!10(-2) == 12345.68L);
assert(12345.6789L.quantize!(10, -2) == 12345.68L);
assert(12345.6789L.quantize!(10, floor)(-2) == 12345.67L);
assert(12345.6789L.quantize!(10, -2, floor) == 12345.67L);

assert(12345.6789L.quantize!22(1) == 12342.0L);
assert(12345.6789L.quantize!22 == 12342.0L);

nothrow @nogc @trusted real nearbyint(real x);

Rounds x to the nearest integer value, using the current rounding mode.

Unlike the rint functions, nearbyint does not raise the FE_INEXACT exception.

pure nothrow @nogc @safe real rint(real x);

pure nothrow @nogc @safe double rint(double x);

pure nothrow @nogc @safe float rint(float x);

Rounds x to the nearest integer value, using the current rounding mode. If the return value is not equal to x, the FE_INEXACT exception is raised. nearbyint performs the same operation, but does not set the FE_INEXACT exception.

pure nothrow @nogc @trusted long lrint(real x);

Rounds x to the nearest integer value, using the current rounding mode.

This is generally the fastest method to convert a floating-point number to an integer. Note that the results from this function depend on the rounding mode, if the fractional part of x is exactly 0.5. If using the default rounding mode (ties round to even integers) lrint(4.5) == 4, lrint(5.5)==6.

Examples:

assert(lrint(4.5) == 4);
assert(lrint(5.5) == 6);
assert(lrint(-4.5) == -4);
assert(lrint(-5.5) == -6);

assert(lrint(int.max - 0.5) == 2147483646L);
assert(lrint(int.max + 0.5) == 2147483648L);
assert(lrint(int.min - 0.5) == -2147483648L);
assert(lrint(int.min + 0.5) == -2147483648L);

nothrow @nogc @trusted real round(real x);

Return the value of x rounded to the nearest integer. If the fractional part of x is exactly 0.5, the return value is rounded away from zero.

nothrow @nogc @trusted long lround(real x);

Return the value of x rounded to the nearest integer.

If the fractional part of x is exactly 0.5, the return value is rounded away from zero.

nothrow @nogc @trusted real trunc(real x);

Returns the integer portion of x, dropping the fractional portion.

This is also known as "chop" rounding.

nothrow @nogc @trusted real remainder(real x, real y);

Calculate the remainder x REM y, following IEC 60559.

REM is the value of x - y * n, where n is the integer nearest the exact value of x / y. If |n - x / y| == 0.5, n is even. If the result is zero, it has the same sign as x. Otherwise, the sign of the result is the sign of x / y. Precision mode has no effect on the remainder functions.

remquo returns n in the parameter n.

Special Values

x	y	remainder(x, y)	n	invalid?
±0.0	not 0.0	±0.0	0.0	no
±∞	anything	NAN	?	yes
anything	±0.0	NAN	?	yes
!= ±∞	±∞	x	?	no

Note: remquo not supported on windows

struct IeeeFlags;

IEEE exception status flags ('sticky bits')

These flags indicate that an exceptional floating-point condition has occurred. They indicate that a NaN or an infinity has been generated, that a result is inexact, or that a signalling NaN has been encountered. If floating-point exceptions are enabled (unmasked), a hardware exception will be generated instead of setting these flags.

Examples:

static void func() {
    int a = 10 * 10;
}

real a=3.5;
// Set all the flags to zero
resetIeeeFlags();
assert(!ieeeFlags.divByZero);
// Perform a division by zero.
a/=0.0L;
assert(a==real.infinity);
assert(ieeeFlags.divByZero);
// Create a NaN
a*=0.0L;
assert(ieeeFlags.invalid);
assert(isNaN(a));

// Check that calling func() has no effect on the
// status flags.
IeeeFlags f = ieeeFlags;
func();
assert(ieeeFlags == f);

@property bool inexact();

The result cannot be represented exactly, so rounding occurred.

(example: x = sin(0.1); )

@property bool underflow();

A zero was generated by underflow (example: x = real.min*real.epsilon/2;)

@property bool overflow();

An infinity was generated by overflow (example: x = real.max*2;)

@property bool divByZero();

An infinity was generated by division by zero (example: x = 3/0.0; )

@property bool invalid();

A machine NaN was generated. (example: x = real.infinity * 0.0; )

void resetIeeeFlags();

Set all of the floating-point status flags to false.

@property IeeeFlags ieeeFlags();

Return a snapshot of the current state of the floating-point status flags.

struct FloatingPointControl;

Control the Floating point hardware

Change the IEEE754 floating-point rounding mode and the floating-point hardware exceptions.

By default, the rounding mode is roundToNearest and all hardware exceptions are disabled. For most applications, debugging is easier if the division by zero, overflow, and invalid operation exceptions are enabled. These three are combined into a severeExceptions value for convenience. Note in particular that if invalidException is enabled, a hardware trap will be generated whenever an uninitialized floating-point variable is used.

All changes are temporary. The previous state is restored at the end of the scope.

Example:

{
    FloatingPointControl fpctrl;

    // Enable hardware exceptions for division by zero, overflow to infinity,
    // invalid operations, and uninitialized floating-point variables.
    fpctrl.enableExceptions(FloatingPointControl.severeExceptions);

    // This will generate a hardware exception, if x is a
    // default-initialized floating point variable:
    real x; // Add `= 0` or even `= real.nan` to not throw the exception.
    real y = x * 3.0;

    // The exception is only thrown for default-uninitialized NaN-s.
    // NaN-s with other payload are valid:
    real z = y * real.nan; // ok

    // Changing the rounding mode:
    fpctrl.rounding = FloatingPointControl.roundUp;
    assert(rint(1.1) == 2);

    // The set hardware exceptions will be disabled when leaving this scope.
    // The original rounding mode will also be restored.
}

// Ensure previous values are returned:
assert(!FloatingPointControl.enabledExceptions);
assert(FloatingPointControl.rounding == FloatingPointControl.roundToNearest);
assert(rint(1.1) == 1);

severeExceptions

Severe = The overflow, division by zero, and invalid exceptions.

static nothrow @nogc @property @safe bool hasExceptionTraps();

Returns true if the current FPU supports exception trapping

@nogc void enableExceptions(uint exceptions);

Enable (unmask) specific hardware exceptions. Multiple exceptions may be ORed together.

@nogc void disableExceptions(uint exceptions);

Disable (mask) specific hardware exceptions. Multiple exceptions may be ORed together.

@nogc @property void rounding(RoundingMode newMode);

Change the floating-point hardware rounding mode

static @nogc @property uint enabledExceptions();

Return the exceptions which are currently enabled (unmasked)

static @nogc @property RoundingMode rounding();

Return the currently active rounding mode

pure nothrow @nogc @trusted bool isNaN(X)(X x)
if (isFloatingPoint!X);

Determines if x is NaN.

Parameters:

X x	a floating point number.

Returns:

true if x is Nan.

Examples:

assert( isNaN(float.init));
assert( isNaN(-double.init));
assert( isNaN(real.nan));
assert( isNaN(-real.nan));
assert(!isNaN(cast(float)53.6));
assert(!isNaN(cast(real)-53.6));

pure nothrow @nogc @trusted bool isFinite(X)(X x);

Determines if x is finite.

Parameters:

X x	a floating point number.

Returns:

true if x is finite.

Examples:

assert( isFinite(1.23f));
assert( isFinite(float.max));
assert( isFinite(float.min_normal));
assert(!isFinite(float.nan));
assert(!isFinite(float.infinity));

pure nothrow @nogc @trusted bool isNormal(X)(X x);

Determines if x is normalized.

A normalized number must not be zero, subnormal, infinite nor NAN.

Parameters:

X x	a floating point number.

Returns:

true if x is normalized.

Examples:

float f = 3;
double d = 500;
real e = 10e+48;

assert(isNormal(f));
assert(isNormal(d));
assert(isNormal(e));
f = d = e = 0;
assert(!isNormal(f));
assert(!isNormal(d));
assert(!isNormal(e));
assert(!isNormal(real.infinity));
assert(isNormal(-real.max));
assert(!isNormal(real.min_normal/4));

pure nothrow @nogc @trusted bool isSubnormal(X)(X x);

Determines if x is subnormal.

Subnormals (also known as "denormal number"), have a 0 exponent and a 0 most significant mantissa bit.

Parameters:

X x	a floating point number.

Returns:

true if x is a denormal number.

Examples:

import std.meta : AliasSeq;

foreach (T; AliasSeq!(float, double, real))
{
    T f;
    for (f = 1.0; !isSubnormal(f); f /= 2)
        assert(f != 0);
}

pure nothrow @nogc @trusted bool isInfinity(X)(X x)
if (isFloatingPoint!X);

Determines if x is ±∞.

Parameters:

X x	a floating point number.

Returns:

true if x is ±∞.

Examples:

assert(!isInfinity(float.init));
assert(!isInfinity(-float.init));
assert(!isInfinity(float.nan));
assert(!isInfinity(-float.nan));
assert(isInfinity(float.infinity));
assert(isInfinity(-float.infinity));
assert(isInfinity(-1.0f / 0.0f));

pure nothrow @nogc @trusted bool isIdentical(real x, real y);

Is the binary representation of x identical to y?

Same as ==, except that positive and negative zero are not identical, and two NANs are identical if they have the same 'payload'.

pure nothrow @nogc @trusted int signbit(X)(X x);

Return 1 if sign bit of e is set, 0 if not.

Examples:

assert(!signbit(float.nan));
assert(signbit(-float.nan));
assert(!signbit(168.1234f));
assert(signbit(-168.1234f));
assert(!signbit(0.0f));
assert(signbit(-0.0f));
assert(signbit(-float.max));
assert(!signbit(float.max));

assert(!signbit(double.nan));
assert(signbit(-double.nan));
assert(!signbit(168.1234));
assert(signbit(-168.1234));
assert(!signbit(0.0));
assert(signbit(-0.0));
assert(signbit(-double.max));
assert(!signbit(double.max));

assert(!signbit(real.nan));
assert(signbit(-real.nan));
assert(!signbit(168.1234L));
assert(signbit(-168.1234L));
assert(!signbit(0.0L));
assert(signbit(-0.0L));
assert(signbit(-real.max));
assert(!signbit(real.max));

pure nothrow @nogc @trusted R copysign(R, X)(R to, X from)
if (isFloatingPoint!R && isFloatingPoint!X);

Return a value composed of to with from's sign bit.

pure nothrow @nogc @safe F sgn(F)(F x);

Returns -1 if x < 0, x if x == 0, 1 if x > 0, and NAN if x==NAN.

Examples:

assert(sgn(168.1234) == 1);
assert(sgn(-168.1234) == -1);
assert(sgn(0.0) == 0);
assert(sgn(-0.0) == 0);

pure nothrow @nogc @trusted real NaN(ulong payload);

Create a quiet NAN, storing an integer inside the payload.

For floats, the largest possible payload is 0x3F_FFFF. For doubles, it is 0x3_FFFF_FFFF_FFFF. For 80-bit or 128-bit reals, it is 0x3FFF_FFFF_FFFF_FFFF.

pure nothrow @nogc @trusted ulong getNaNPayload(real x);

Extract an integral payload from a NAN.

Returns:

the integer payload as a ulong.

For floats, the largest possible payload is 0x3F_FFFF. For doubles, it is 0x3_FFFF_FFFF_FFFF. For 80-bit or 128-bit reals, it is 0x3FFF_FFFF_FFFF_FFFF.

pure nothrow @nogc @trusted real nextUp(real x);

pure nothrow @nogc @trusted double nextUp(double x);

pure nothrow @nogc @trusted float nextUp(float x);

Calculate the next largest floating point value after x.

Return the least number greater than x that is representable as a real; thus, it gives the next point on the IEEE number line.

Special Values

x	nextUp(x)
-∞	-real.max
±0.0	real.min_normal*real.epsilon
real.max	∞
∞	∞
NAN	NAN

pure nothrow @nogc @safe real nextDown(real x);

pure nothrow @nogc @safe double nextDown(double x);

pure nothrow @nogc @safe float nextDown(float x);

Calculate the next smallest floating point value before x.

Return the greatest number less than x that is representable as a real; thus, it gives the previous point on the IEEE number line.

Special Values

x	nextDown(x)
∞	real.max
±0.0	-real.min_normal*real.epsilon
-real.max	-∞
-∞	-∞
NAN	NAN

Examples:

assert( nextDown(1.0 + real.epsilon) == 1.0);

pure nothrow @nogc @safe T nextafter(T)(const T x, const T y);

Calculates the next representable value after x in the direction of y.

If y > x, the result will be the next largest floating-point value; if y < x, the result will be the next smallest value. If x == y, the result is y.

Remarks: This function is not generally very useful; it's almost always better to use the faster functions nextUp() or nextDown() instead.

The FE_INEXACT and FE_OVERFLOW exceptions will be raised if x is finite and the function result is infinite. The FE_INEXACT and FE_UNDERFLOW exceptions will be raised if the function value is subnormal, and x is not equal to y.

Examples:

float a = 1;
assert(is(typeof(nextafter(a, a)) == float));
assert(nextafter(a, a.infinity) > a);

double b = 2;
assert(is(typeof(nextafter(b, b)) == double));
assert(nextafter(b, b.infinity) > b);

real c = 3;
assert(is(typeof(nextafter(c, c)) == real));
assert(nextafter(c, c.infinity) > c);

pure nothrow @nogc @safe real fdim(real x, real y);

Returns the positive difference between x and y.

Returns:

Special Values

x, y	fdim(x, y)
x > y	x - y
x <= y	+0.0

pure nothrow @nogc @safe real fmax(real x, real y);

Returns the larger of x and y.

pure nothrow @nogc @safe real fmin(real x, real y);

Returns the smaller of x and y.

pure nothrow @nogc @safe real fma(real x, real y, real z);

Returns (x * y) + z, rounding only once according to the current rounding mode.

Bugs:

Not currently implemented - rounds twice.

pure nothrow @nogc @trusted Unqual!F pow(F, G)(F x, G n)
if (isFloatingPoint!F && isIntegral!G);

Compute the value of x n, where n is an integer

pure nothrow @nogc @trusted typeof(Unqual!F.init * Unqual!G.init) pow(F, G)(F x, G n)
if (isIntegral!F && isIntegral!G);

Compute the value of an integer x, raised to the power of a positive integer n.

If both x and n are 0, the result is 1. If n is negative, an integer divide error will occur at runtime, regardless of the value of x.

Examples:

immutable int one = 1;
immutable byte two = 2;
immutable ubyte three = 3;
immutable short four = 4;
immutable long ten = 10;

assert(pow(two, three) == 8);
assert(pow(two, ten) == 1024);
assert(pow(one, ten) == 1);
assert(pow(ten, four) == 10_000);
assert(pow(four, 10) == 1_048_576);
assert(pow(three, four) == 81);

pure nothrow @nogc @trusted real pow(I, F)(I x, F y)
if (isIntegral!I && isFloatingPoint!F);

Computes integer to floating point powers.

pure nothrow @nogc @trusted Unqual!(Largest!(F, G)) pow(F, G)(F x, G y)
if (isFloatingPoint!F && isFloatingPoint!G);

Calculates xy.

Special Values

x	y	pow(x, y)	div 0	invalid?
anything	±0.0	1.0	no	no
|x| > 1	+∞	+∞	no	no
|x| < 1	+∞	+0.0	no	no
|x| > 1	-∞	+0.0	no	no
|x| < 1	-∞	+∞	no	no
+∞	> 0.0	+∞	no	no
+∞	< 0.0	+0.0	no	no
-∞	odd integer > 0.0	-∞	no	no
-∞	> 0.0, not odd integer	+∞	no	no
-∞	odd integer < 0.0	-0.0	no	no
-∞	< 0.0, not odd integer	+0.0	no	no
±1.0	±∞	NAN	no	yes
< 0.0	finite, nonintegral	NAN	no	yes
±0.0	odd integer < 0.0	±∞	yes	no
±0.0	< 0.0, not odd integer	+∞	yes	no
±0.0	odd integer > 0.0	±0.0	no	no
±0.0	> 0.0, not odd integer	+0.0	no	no

pure nothrow @nogc @trusted int feqrel(X)(const X x, const X y)
if (isFloatingPoint!X);

To what precision is x equal to y?

Returns:

the number of mantissa bits which are equal in x and y. eg, 0x1.F8p+60 and 0x1.F1p+60 are equal to 5 bits of precision.

Special Values

x	y	feqrel(x, y)
x	x	real.mant_dig
x	>= 2*x	0
x	<= x/2	0
NAN	any	0
any	NAN	0

pure nothrow @nogc @trusted Unqual!(CommonType!(T1, T2)) poly(T1, T2)(T1 x, in T2[] A)
if (isFloatingPoint!T1 && isFloatingPoint!T2);

Evaluate polynomial A(x) = a₀ + a₁x + a₂x² + a₃x³; ...

Uses Horner's rule A(x) = a₀ + x(a₁ + x(a₂ + x(a₃ + ...)))

Parameters:

T1 x	the value to evaluate.
T2[] A	array of coefficients a0, a1, etc.

Examples:

real x = 3.1;
static real[] pp = [56.1, 32.7, 6];

assert(poly(x, pp) == (56.1L + (32.7L + 6.0L * x) * x));

bool approxEqual(T, U, V)(T lhs, U rhs, V maxRelDiff, V maxAbsDiff = 1e-05);

Computes whether lhs is approximately equal to rhs admitting a maximum relative difference maxRelDiff and a maximum absolute difference maxAbsDiff.

If the two inputs are ranges, approxEqual returns true if and only if the ranges have the same number of elements and if approxEqual evaluates to true for each pair of elements.

bool approxEqual(T, U)(T lhs, U rhs);

Returns approxEqual(lhs, rhs, 1e-2, 1e-5).

Examples:

assert(approxEqual(1.0, 1.0099));
assert(!approxEqual(1.0, 1.011));
float[] arr1 = [ 1.0, 2.0, 3.0 ];
double[] arr2 = [ 1.001, 1.999, 3 ];
assert(approxEqual(arr1, arr2));

real num = real.infinity;
assert(num == real.infinity);  // Passes.
assert(approxEqual(num, real.infinity));  // Fails.
num = -real.infinity;
assert(num == -real.infinity);  // Passes.
assert(approxEqual(num, -real.infinity));  // Fails.

assert(!approxEqual(3, 0));
assert(approxEqual(3, 3));
assert(approxEqual(3.0, 3));
assert(approxEqual([3, 3, 3], 3.0));
assert(approxEqual([3.0, 3.0, 3.0], 3));
int a = 10;
assert(approxEqual(10, a));

pure nothrow @nogc @trusted int cmp(T)(const(T) x, const(T) y)
if (isFloatingPoint!T);

Defines a total order on all floating-point numbers.

The order is defined as follows:

• All numbers in [-∞, +∞] are ordered the same way as by built-in comparison, with the exception of -0.0, which is less than +0.0;
• If the sign bit is set (that is, it's 'negative'), NAN is less than any number; if the sign bit is not set (it is 'positive'), NAN is greater than any number;
• NANs of the same sign are ordered by the payload ('negative' ones - in reverse order).

Returns:

negative value if x precedes y in the order specified above; 0 if x and y are identical, and positive value otherwise.

See Also:

isIdentical 

Standards:

Conforms to IEEE 754-2008

Examples:

Most numbers are ordered naturally.

assert(cmp(-double.infinity, -double.max) < 0);
assert(cmp(-double.max, -100.0) < 0);
assert(cmp(-100.0, -0.5) < 0);
assert(cmp(-0.5, 0.0) < 0);
assert(cmp(0.0, 0.5) < 0);
assert(cmp(0.5, 100.0) < 0);
assert(cmp(100.0, double.max) < 0);
assert(cmp(double.max, double.infinity) < 0);

assert(cmp(1.0, 1.0) == 0);

Examples:

Positive and negative zeroes are distinct.

assert(cmp(-0.0, +0.0) < 0);
assert(cmp(+0.0, -0.0) > 0);

Examples:

Depending on the sign, NANs go to either end of the spectrum.

assert(cmp(-double.nan, -double.infinity) < 0);
assert(cmp(double.infinity, double.nan) < 0);
assert(cmp(-double.nan, double.nan) < 0);

Examples:

NANs of the same sign are ordered by the payload.

assert(cmp(NaN(10), NaN(20)) < 0);
assert(cmp(-NaN(20), -NaN(10)) < 0);

T nextPow2(T)(const T val)
if (isIntegral!T);

T nextPow2(T)(const T val)
if (isFloatingPoint!T);

Gives the next power of two after val. T can be any built-in numerical type.

If the operation would lead to an over/underflow, this function will return 0.

Parameters:

T val

any number

Returns:

the next power of two after val

Examples:

assert(nextPow2(2) == 4);
assert(nextPow2(10) == 16);
assert(nextPow2(4000) == 4096);

assert(nextPow2(-2) == -4);
assert(nextPow2(-10) == -16);

assert(nextPow2(uint.max) == 0);
assert(nextPow2(uint.min) == 0);
assert(nextPow2(size_t.max) == 0);
assert(nextPow2(size_t.min) == 0);

assert(nextPow2(int.max) == 0);
assert(nextPow2(int.min) == 0);
assert(nextPow2(long.max) == 0);
assert(nextPow2(long.min) == 0);

Examples:

assert(nextPow2(2.1) == 4.0);
assert(nextPow2(-2.0) == -4.0);
assert(nextPow2(0.25) == 0.5);
assert(nextPow2(-4.0) == -8.0);

assert(nextPow2(double.max) == 0.0);
assert(nextPow2(double.infinity) == double.infinity);

T truncPow2(T)(const T val)
if (isIntegral!T);

T truncPow2(T)(const T val)
if (isFloatingPoint!T);

Gives the last power of two before val. <> can be any built-in numerical type.

Parameters:

T val

any number

Returns:

the last power of two before val

Examples:

assert(truncPow2(3) == 2);
assert(truncPow2(4) == 4);
assert(truncPow2(10) == 8);
assert(truncPow2(4000) == 2048);

assert(truncPow2(-5) == -4);
assert(truncPow2(-20) == -16);

assert(truncPow2(uint.max) == int.max + 1);
assert(truncPow2(uint.min) == 0);
assert(truncPow2(ulong.max) == long.max + 1);
assert(truncPow2(ulong.min) == 0);

assert(truncPow2(int.max) == (int.max / 2) + 1);
assert(truncPow2(int.min) == int.min);
assert(truncPow2(long.max) == (long.max / 2) + 1);
assert(truncPow2(long.min) == long.min);

Examples:

assert(truncPow2(2.1) == 2.0);
assert(truncPow2(7.0) == 4.0);
assert(truncPow2(-1.9) == -1.0);
assert(truncPow2(0.24) == 0.125);
assert(truncPow2(-7.0) == -4.0);

assert(truncPow2(double.infinity) == double.infinity);

pure nothrow @nogc @safe bool isPowerOf2(X)(const X x)
if (isNumeric!X);

Check whether a number is an integer power of two.

Note that only positive numbers can be integer powers of two. This function always return false if x is negative or zero.

Parameters:

X x	the number to test

Returns:

true if x is an integer power of two.

Examples:

assert( isPowerOf2(1.0L));
assert( isPowerOf2(2.0L));
assert( isPowerOf2(0.5L));
assert( isPowerOf2(pow(2.0L, 96)));
assert( isPowerOf2(pow(2.0L, -77)));

assert(!isPowerOf2(-2.0L));
assert(!isPowerOf2(-0.5L));
assert(!isPowerOf2(0.0L));
assert(!isPowerOf2(4.315));
assert(!isPowerOf2(1.0L / 3.0L));

assert(!isPowerOf2(real.nan));
assert(!isPowerOf2(real.infinity));

Examples:

assert( isPowerOf2(1));
assert( isPowerOf2(2));
assert( isPowerOf2(1uL << 63));

assert(!isPowerOf2(-4));
assert(!isPowerOf2(0));
assert(!isPowerOf2(1337u));