etc.c.curl

enum string LIBCURL_COPYRIGHT;

This is the global package copyright

enum string LIBCURL_VERSION;

This is the version number of the libcurl package from which this header file origins:

enum int LIBCURL_VERSION_MAJOR;

enum int LIBCURL_VERSION_MINOR;

enum int LIBCURL_VERSION_PATCH;

The numeric version number is also available "in parts" by using these constants

enum int LIBCURL_VERSION_NUM;

This is the numeric version of the libcurl version number, meant for easier parsing and comparions by programs. The LIBCURL_VERSION_NUM define will always follow this syntax:

0xXXYYZZ

Where XX, YY and ZZ are the main version, release and patch numbers in hexadecimal (using 8 bits each). All three numbers are always represented using two digits. 1.2 would appear as "0x010200" while version 9.11.7 appears as "0x090b07".

This 6-digit (24 bits) hexadecimal number does not show pre-release number, and it is always a greater number in a more recent release. It makes comparisons with greater than and less than work.

enum string LIBCURL_TIMESTAMP;

This is the date and time when the full source package was created. The timestamp is not stored in git, as the timestamp is properly set in the tarballs by the maketgz script.

The format of the date should follow this template:

"Mon Feb 12 11:35:33 UTC 2007"

alias curl_off_t = long;

Data type definition of curl_off_t.

jdrewsen - Always 64bit signed and that is what long is in D.

Comment below is from curlbuild.h:

NOTE 2:

For any given platform/compiler curl_off_t must be typedef'ed to a 64-bit wide signed integral data type. The width of this data type must remain constant and independent of any possible large file support settings.

As an exception to the above, curl_off_t shall be typedef'ed to a 32-bit wide signed integral data type if there is no 64-bit type.

alias CURL = void;

alias curl_socket_t = std.socket.socket_t;

jdrewsen - Get socket alias from std.socket

struct curl_httppost;

curl_httppost* next;

next entry in the list

char* name;

pointer to allocated name

c_long namelength;

length of name length

char* contents;

pointer to allocated data contents

c_long contentslength;

length of contents field

char* buffer;

pointer to allocated buffer contents

c_long bufferlength;

length of buffer field

char* contenttype;

Content-Type

curl_slist* contentheader;

list of extra headers for this form

curl_httppost* more;

if one field name has more than one file, this link should link to following files

c_long flags;

as defined below

char* showfilename;

The file name to show. If not set, the actual file name will be used (if this is a file part)

void* userp;

custom pointer used for HTTPPOST_CALLBACK posts

enum int HTTPPOST_FILENAME;

specified content is a file name

enum int HTTPPOST_READFILE;

specified content is a file name

enum int HTTPPOST_PTRNAME;

name is only stored pointer do not free in formfree

enum int HTTPPOST_PTRCONTENTS;

contents is only stored pointer do not free in formfree

enum int HTTPPOST_BUFFER;

upload file from buffer

enum int HTTPPOST_PTRBUFFER;

upload file from pointer contents

enum int HTTPPOST_CALLBACK;

upload file contents by using the regular read callback to get the data and pass the given pointer as custom pointer

alias curl_progress_callback = int function(void* clientp, double dltotal, double dlnow, double ultotal, double ulnow);

enum int CURL_MAX_WRITE_SIZE;

Tests have proven that 20K is a very bad buffer size for uploads on Windows, while 16K for some odd reason performed a lot better. We do the ifndef check to allow this value to easier be changed at build time for those who feel adventurous. The practical minimum is about 400 bytes since libcurl uses a buffer of this size as a scratch area (unrelated to network send operations).

enum int CURL_MAX_HTTP_HEADER;

The only reason to have a max limit for this is to avoid the risk of a bad server feeding libcurl with a never-ending header that will cause reallocs infinitely

enum int CURL_WRITEFUNC_PAUSE;

This is a magic return code for the write callback that, when returned, will signal libcurl to pause receiving on the current transfer.

alias curl_write_callback = ulong function(char* buffer, ulong size, ulong nitems, void* outstream);

enum CurlFileType: int;

enumeration of file types

file

directory

symlink

device_block

device_char

namedpipe

socket

door

unknown

is possible only on Sun Solaris now

alias curlfiletype = int;

enum CurlFInfoFlagKnown: int;

filename

filetype

time

perm

uid

gid

size

hlinkcount

struct _N2;

Content of this structure depends on information which is known and is achievable (e.g. by FTP LIST parsing). Please see the url_easy_setopt(3) man page for callbacks returning this structure -- some fields are mandatory, some others are optional. The FLAG field has special meaning.

If some of these fields is not NULL, it is a pointer to b_data.

char* time;

char* perm;

char* user;

char* group;

char* target;

pointer to the target filename of a symlink

struct curl_fileinfo;

Content of this structure depends on information which is known and is achievable (e.g. by FTP LIST parsing). Please see the url_easy_setopt(3) man page for callbacks returning this structure -- some fields are mandatory, some others are optional. The FLAG field has special meaning.

char* filename;

curlfiletype filetype;

time_t time;

uint perm;

int uid;

int gid;

curl_off_t size;

c_long hardlinks;

_N2 strings;

uint flags;

char* b_data;

size_t b_size;

size_t b_used;

enum CurlChunkBgnFunc: int;

return codes for CURLOPT_CHUNK_BGN_FUNCTION

ok

fail

tell the lib to end the task

skip

skip this chunk over

alias curl_chunk_bgn_callback = long function(void* transfer_info, void* ptr, int remains);

if splitting of data transfer is enabled, this callback is called before download of an individual chunk started. Note that parameter "remains" works only for FTP wildcard downloading (for now), otherwise is not used

enum CurlChunkEndFunc: int;

return codes for CURLOPT_CHUNK_END_FUNCTION

ok

fail

alias curl_chunk_end_callback = long function(void* ptr);

If splitting of data transfer is enabled this callback is called after download of an individual chunk finished. Note! After this callback was set then it have to be called FOR ALL chunks. Even if downloading of this chunk was skipped in CHUNK_BGN_FUNC. This is the reason why we don't need "transfer_info" parameter in this callback and we are not interested in "remains" parameter too.

enum CurlFnMAtchFunc: int;

return codes for FNMATCHFUNCTION

match

nomatch

fail

alias curl_fnmatch_callback = int function(void* ptr, const(char*) pattern, const(char*) string);

callback type for wildcard downloading pattern matching. If the string matches the pattern, return CURL_FNMATCHFUNC_MATCH value, etc.

enum CurlSeekPos: int;

seek whence...

set

current

end

enum CurlSeek: int;

These are the return codes for the seek callbacks

ok

fail

fail the entire transfer

cantseek

tell libcurl seeking can't be done, so libcurl might try other means instead

alias curl_seek_callback = int function(void* instream, long offset, int origin);

enum CurlReadFunc: int;

abort

This is a return code for the read callback that, when returned, will signal libcurl to immediately abort the current transfer.

pause

This is a return code for the read callback that, when returned, will const signal libcurl to pause sending data on the current transfer.

alias curl_read_callback = ulong function(char* buffer, ulong size, ulong nitems, void* instream);

enum CurlSockType: int;

ipcxn

socket created for a specific IP connection

last

never use

alias curlsocktype = int;

alias curl_sockopt_callback = int function(void* clientp, socket_t curlfd, int purpose);

struct curl_sockaddr;

addrlen was a socklen_t type before 7.18.0 but it turned really ugly and painful on the systems that lack this type

int family;

int socktype;

int protocol;

uint addrlen;

addrlen was a socklen_t type before 7.18.0 but it turned really ugly and painful on the systems that lack this type

sockaddr addr;

alias curl_opensocket_callback = socket_t function(void* clientp, int purpose, curl_sockaddr* address);

enum CurlIoError: int;

ok

I/O operation successful

unknowncmd

command was unknown to callback

failrestart

failed to restart the read

last

never use

alias curlioerr = int;

enum CurlIoCmd: int;

nop

command was unknown to callback

restartread

failed to restart the read

last

never use

alias curliocmd = int;

alias curl_ioctl_callback = int function(void* handle, int cmd, void* clientp);

alias curl_malloc_callback = void* function(ulong size);

alias curl_free_callback = void function(void* ptr);

alias curl_realloc_callback = void* function(void* ptr, ulong size);

alias curl_strdup_callback = char* function(const(char*) str);

alias curl_calloc_callback = void* function(ulong nmemb, ulong size);

The following typedef's are signatures of malloc, free, realloc, strdup and calloc respectively. Function pointers of these types can be passed to the curl_global_init_mem() function to set user defined memory management callback routines.

enum CurlCallbackInfo: int;

the kind of data that is passed to information_callback

text

header_in

header_out

data_in

data_out

ssl_data_in

ssl_data_out

end

alias curl_infotype = int;

alias curl_debug_callback = int function(void* handle, int type, char* data, ulong size, void* userptr);

enum CurlError: int;

All possible error codes from all sorts of curl functions. Future versions may return other values, stay prepared.

Always add new return codes last. Never *EVER* remove any. The return codes must remain the same!

ok

unsupported_protocol

1

failed_init

2

url_malformat

3

not_built_in

4 - [was obsoleted in August 2007 for 7.17.0, reused in April 2011 for 7.21.5]

couldnt_resolve_proxy

5

couldnt_resolve_host

6

couldnt_connect

7

ftp_weird_server_reply

8

remote_access_denied

9 a service was denied by the server due to lack of access - when login fails this is not returned.

obsolete10

10 - NOT USED

ftp_weird_pass_reply

11

obsolete12

12 - NOT USED

ftp_weird_pasv_reply

13

ftp_weird_227_format

14

ftp_cant_get_host

15

obsolete16

16 - NOT USED

ftp_couldnt_set_type

17

partial_file

18

ftp_couldnt_retr_file

19

obsolete20

20 - NOT USED

quote_error

21 - quote command failure

http_returned_error

22

write_error

23

obsolete24

24 - NOT USED

upload_failed

25 - failed upload "command"

read_error

26 - couldn't open/read from file

out_of_memory

27

operation_timedout

Note: CURLE_OUT_OF_MEMORY may sometimes indicate a conversion error instead of a memory allocation error if CURL_DOES_CONVERSIONS is defined

28 - the timeout time was reached

obsolete29

29 - NOT USED

ftp_port_failed

30 - FTP PORT operation failed

ftp_couldnt_use_rest

31 - the REST command failed

obsolete32

32 - NOT USED

range_error

33 - RANGE "command" didn't work

http_post_error

34

ssl_connect_error

35 - wrong when connecting with SSL

bad_download_resume

36 - couldn't resume download

file_couldnt_read_file

37

ldap_cannot_bind

38

ldap_search_failed

39

obsolete40

40 - NOT USED

function_not_found

41

aborted_by_callback

42

bad_function_argument

43

obsolete44

44 - NOT USED

interface_failed

45 - CURLOPT_INTERFACE failed

obsolete46

46 - NOT USED

too_many_redirects

47 - catch endless re-direct loops

unknown_option

48 - User specified an unknown option

telnet_option_syntax

49 - Malformed telnet option

obsolete50

50 - NOT USED

peer_failed_verification

51 - peer's certificate or fingerprint wasn't verified fine

got_nothing

52 - when this is a specific error

ssl_engine_notfound

53 - SSL crypto engine not found

ssl_engine_setfailed

54 - can not set SSL crypto engine as default

send_error

55 - failed sending network data

recv_error

56 - failure in receiving network data

obsolete57

57 - NOT IN USE

ssl_certproblem

58 - problem with the local certificate

ssl_cipher

59 - couldn't use specified cipher

ssl_cacert

60 - problem with the CA cert (path?)

bad_content_encoding

61 - Unrecognized transfer encoding

ldap_invalid_url

62 - Invalid LDAP URL

filesize_exceeded

63 - Maximum file size exceeded

use_ssl_failed

64 - Requested FTP SSL level failed

send_fail_rewind

65 - Sending the data requires a rewind that failed

ssl_engine_initfailed

66 - failed to initialise ENGINE

login_denied

67 - user, password or similar was not accepted and we failed to login

tftp_notfound

68 - file not found on server

tftp_perm

69 - permission problem on server

remote_disk_full

70 - out of disk space on server

tftp_illegal

71 - Illegal TFTP operation

tftp_unknownid

72 - Unknown transfer ID

remote_file_exists

73 - File already exists

tftp_nosuchuser

74 - No such user

conv_failed

75 - conversion failed

conv_reqd

76 - caller must register conversion callbacks using curl_easy_setopt options CURLOPT_CONV_FROM_NETWORK_FUNCTION, CURLOPT_CONV_TO_NETWORK_FUNCTION, and CURLOPT_CONV_FROM_UTF8_FUNCTION

ssl_cacert_badfile

77 - could not load CACERT file, missing or wrong format

remote_file_not_found

78 - remote file not found

ssh

79 - error from the SSH layer, somewhat generic so the error message will be of interest when this has happened

ssl_shutdown_failed

80 - Failed to shut down the SSL connection

again

81 - socket is not ready for send/recv, wait till it's ready and try again (Added in 7.18.2)

ssl_crl_badfile

82 - could not load CRL file, missing or wrong format (Added in 7.19.0)

ssl_issuer_error

83 - Issuer check failed. (Added in 7.19.0)

ftp_pret_failed

84 - a PRET command failed

rtsp_cseq_error

85 - mismatch of RTSP CSeq numbers

rtsp_session_error

86 - mismatch of RTSP Session Identifiers

ftp_bad_file_list

87 - unable to parse FTP file list

chunk_failed

88 - chunk callback reported error

curl_last

never use!

alias CURLcode = int;

alias curl_conv_callback = int function(char* buffer, ulong length);

This prototype applies to all conversion callbacks

alias curl_ssl_ctx_callback = int function(void* curl, void* ssl_ctx, void* userptr);

actually an OpenSSL SSL_CTX

enum CurlProxy: int;

http

added in 7.10, new in 7.19.4 default is to use CONNECT HTTP/1.1

http_1_0

added in 7.19.4, force to use CONNECT HTTP/1.0

socks4

support added in 7.15.2, enum existed already in 7.10

socks5

added in 7.10

socks4a

added in 7.18.0

socks5_hostname

Use the SOCKS5 protocol but pass along the host name rather than the IP address. added in 7.18.0

alias curl_proxytype = int;

enum CurlAuth: long;

basic

Basic (default)

digest

Digest

gssnegotiate

GSS-Negotiate

ntlm

NTLM

digest_ie

Digest with IE flavour

only

used together with a single other type to force no auth or just that single type

any

all fine types set

anysafe

enum CurlSshAuth: int;

any

all types supported by the server

none

none allowed, silly but complete

publickey

public/private key files

password

password

host

host key files

keyboard

keyboard interactive

enum int CURL_ERROR_SIZE;

enum CurlKHType: int;

points to a zero-terminated string encoded with base64 if len is zero, otherwise to the "raw" data

unknown

rsa1

rsa

dss

struct curl_khkey;

const(char)* key;

points to a zero-terminated string encoded with base64 if len is zero, otherwise to the "raw" data

size_t len;

CurlKHType keytype;

enum CurlKHStat: int;

this is the set of return values expected from the curl_sshkeycallback callback

fine_add_to_file

fine

reject

reject the connection, return an error

defer

do not accept it, but we can't answer right now so this causes a CURLE_DEFER error but otherwise the connection will be left intact etc

last

not for use, only a marker for last-in-list

enum CurlKHMatch: int;

this is the set of status codes pass in to the callback

ok

match

mismatch

host found, key mismatch!

missing

no matching host/key found

last

not for use, only a marker for last-in-list

alias curl_sshkeycallback = int function(void* easy, curl_khkey* knownkey, curl_khkey* foundkey, CurlKHMatch m, void* clientp);

enum CurlUseSSL: int;

parameter for the CURLOPT_USE_SSL option

none

do not attempt to use SSL

tryssl

try using SSL, proceed anyway otherwise

control

SSL for the control connection or fail

all

SSL for all communication or fail

last

not an option, never use

alias curl_usessl = int;

enum CurlFtpSSL: int;

parameter for the CURLOPT_FTP_SSL_CCC option

ccc_none

do not send CCC

ccc_passive

Let the server initiate the shutdown

ccc_active

Initiate the shutdown

ccc_last

not an option, never use

alias curl_ftpccc = int;

enum CurlFtpAuth: int;

parameter for the CURLOPT_FTPSSLAUTH option

defaultauth

let libcurl decide

ssl

use "AUTH SSL"

tls

use "AUTH TLS"

last

not an option, never use

alias curl_ftpauth = int;

enum CurlFtp: int;

parameter for the CURLOPT_FTP_CREATE_MISSING_DIRS option

create_dir_none

do NOT create missing dirs!

create_dir

(FTP/SFTP) if CWD fails, try MKD and then CWD again if MKD succeeded, for SFTP this does similar magic

create_dir_retry

(FTP only) if CWD fails, try MKD and then CWD again even if MKD failed!

create_dir_last

not an option, never use

alias curl_ftpcreatedir = int;

enum CurlFtpMethod: int;

parameter for the CURLOPT_FTP_FILEMETHOD option

defaultmethod

let libcurl pick

multicwd

single CWD operation for each path part

nocwd

no CWD at all

singlecwd

one CWD to full dir, then work on file

last

not an option, never use

alias curl_ftpmethod = int;

enum CurlProto: int;

CURLPROTO_ defines are for the CURLOPT_*PROTOCOLS options

http

https

ftp

ftps

scp

sftp

telnet

ldap

ldaps

dict

file

tftp

imap

imaps

pop3

pop3s

smtp

smtps

rtsp

rtmp

rtmpt

rtmpe

rtmpte

rtmps

rtmpts

gopher

all

enable everything

enum int CURLOPTTYPE_LONG;

enum int CURLOPTTYPE_OBJECTPOINT;

enum int CURLOPTTYPE_FUNCTIONPOINT;

enum int CURLOPTTYPE_OFF_T;

long may be 32 or 64 bits, but we should never depend on anything else but 32

alias LONG = CURLOPTTYPE_LONG;

alias OBJECTPOINT = CURLOPTTYPE_OBJECTPOINT;

alias FUNCTIONPOINT = CURLOPTTYPE_FUNCTIONPOINT;

alias OFF_T = CURLOPTTYPE_OFF_T;

name is uppercase CURLOPT_<name>, type is one of the defined CURLOPTTYPE_<type> number is unique identifier

The macro "##" is ISO C, we assume pre-ISO C doesn't support it.

enum CurlOption: int;

file

This is the FILE * or void * the regular output should be written to.

url

The full URL to get/put

port

Port number to connect to, if other than default.

proxy

Name of proxy to use.

userpwd

"name:password" to use when fetching.

proxyuserpwd

"name:password" to use with proxy.

range

Range to get, specified as an ASCII string.

infile

not used

Specified file stream to upload from (use as input):

errorbuffer

Buffer to receive error messages in, must be at least CURL_ERROR_SIZE bytes big. If this is not used, error messages go to stderr instead:

writefunction

Function that will be called to store the output (instead of fwrite). The parameters will use fwrite() syntax, make sure to follow them.

readfunction

Function that will be called to read the input (instead of fread). The parameters will use fread() syntax, make sure to follow them.

timeout

Time-out the read operation after this amount of seconds

infilesize

If the CURLOPT_INFILE is used, this can be used to inform libcurl about how large the file being sent really is. That allows better error checking and better verifies that the upload was successful. -1 means unknown size.

For large file support, there is also a LARGE version of the key which takes an off_t type, allowing platforms with larger off_t sizes to handle larger files. See below for INFILESIZE_LARGE.

postfields

POST static input fields.

referer

Set the referrer page (needed by some CGIs)

ftpport

Set the FTP PORT string (interface name, named or numerical IP address) Use i.e '-' to use default address.

useragent

Set the User-Agent string (examined by some CGIs)

low_speed_limit

If the download receives less than "low speed limit" bytes/second during "low speed time" seconds, the operations is aborted. You could i.e if you have a pretty high speed connection, abort if it is less than 2000 bytes/sec during 20 seconds.

Set the "low speed limit"

low_speed_time

Set the "low speed time"

resume_from

Set the continuation offset.

Note there is also a LARGE version of this key which uses off_t types, allowing for large file offsets on platforms which use larger-than-32-bit off_t's. Look below for RESUME_FROM_LARGE.

cookie

Set cookie in request:

httpheader

This points to a linked list of headers, struct curl_slist kind

httppost

This points to a linked list of post entries, struct curl_httppost

sslcert

name of the file keeping your private SSL-certificate

keypasswd

password for the SSL or SSH private key

crlf

send TYPE parameter?

quote

send linked-list of QUOTE commands

writeheader

send FILE * or void * to store headers to, if you use a callback it is simply passed to the callback unmodified

cookiefile

point to a file to read the initial cookies from, also enables "cookie awareness"

sslversion

What version to specifically try to use. See CURL_SSLVERSION defines below.

timecondition

What kind of HTTP time condition to use, see defines

timevalue

Time to use with the above condition. Specified in number of seconds since 1 Jan 1970

customrequest

Custom request, for customizing the get command like

HTTP: DELETE, TRACE and others

FTP: to use a different list command

stderr

HTTP request, for odd commands like DELETE, TRACE and others

postquote

send linked-list of post-transfer QUOTE commands

writeinfo

Pass a pointer to string of the output using full variable-replacement as described elsewhere.

verbose

talk a lot

header

throw the header out too

noprogress

shut off the progress meter

nobody

use HEAD to get http document

failonerror

no output on http error codes >= 300

upload

this is an upload

post

HTTP POST method

dirlistonly

return bare names when listing directories

append

Append instead of overwrite on upload!

netrc

Specify whether to read the user+password from the .netrc or the URL. This must be one of the CURL_NETRC_* enums below.

followlocation

use Location: Luke!

transfertext

transfer data in text/ASCII format

put

HTTP PUT

progressfunction

Function that will be called instead of the internal progress display function. This function should be defined as the curl_progress_callback prototype defines.

progressdata

Data passed to the progress callback

autoreferer

We want the referrer field set automatically when following locations

proxyport

Port of the proxy, can be set in the proxy string as well with: "[host]:[port]"

postfieldsize

size of the POST input data, if strlen() is not good to use

httpproxytunnel

tunnel non-http operations through a HTTP proxy

intrface

Set the interface string to use as outgoing network interface

krblevel

Set the krb4/5 security level, this also enables krb4/5 awareness. This is a string, 'clear', 'safe', 'confidential' or 'private'. If the string is set but doesn't match one of these, 'private' will be used.

ssl_verifypeer

Set if we should verify the peer in ssl handshake, set 1 to verify.

cainfo

The CApath or CAfile used to validate the peer certificate this option is used only if SSL_VERIFYPEER is true

maxredirs

Maximum number of http redirects to follow

filetime

Pass a long set to 1 to get the date of the requested document (if possible)! Pass a zero to shut it off.

telnetoptions

This points to a linked list of telnet options

maxconnects

Max amount of cached alive connections

closepolicy

What policy to use when closing connections when the cache is filled up

fresh_connect

Set to explicitly use a new connection for the upcoming transfer. Do not use this unless you're absolutely sure of this, as it makes the operation slower and is less friendly for the network.

forbid_reuse

Set to explicitly forbid the upcoming transfer's connection to be re-used when done. Do not use this unless you're absolutely sure of this, as it makes the operation slower and is less friendly for the network.

random_file

Set to a file name that contains random data for libcurl to use to seed the random engine when doing SSL connects.

egdsocket

Set to the Entropy Gathering Daemon socket pathname

connecttimeout

Time-out connect operations after this amount of seconds, if connects are OK within this time, then fine... This only aborts the connect phase. [Only works on unix-style/SIGALRM operating systems]

headerfunction

Function that will be called to store headers (instead of fwrite). The parameters will use fwrite() syntax, make sure to follow them.

httpget

Set this to force the HTTP request to get back to GET. Only really usable if POST, PUT or a custom request have been used first.

ssl_verifyhost

Set if we should verify the Common name from the peer certificate in ssl handshake, set 1 to check existence, 2 to ensure that it matches the provided hostname.

cookiejar

Specify which file name to write all known cookies in after completed operation. Set file name to "-" (dash) to make it go to stdout.

ssl_cipher_list

Specify which SSL ciphers to use

http_version

Specify which HTTP version to use! This must be set to one of the CURL_HTTP_VERSION* enums set below.

ftp_use_epsv

Specifically switch on or off the FTP engine's use of the EPSV command. By default, that one will always be attempted before the more traditional PASV command.

sslcerttype

type of the file keeping your SSL-certificate ("DER", "PEM", "ENG")

sslkey

name of the file keeping your private SSL-key

sslkeytype

type of the file keeping your private SSL-key ("DER", "PEM", "ENG")

sslengine

crypto engine for the SSL-sub system

sslengine_default

set the crypto engine for the SSL-sub system as default the param has no meaning...

dns_use_global_cache

Non-zero value means to use the global dns cache

dns_cache_timeout

DNS cache timeout

prequote

send linked-list of pre-transfer QUOTE commands

debugfunction

set the debug function

debugdata

set the data for the debug function

cookiesession

mark this as start of a cookie session

capath

The CApath directory used to validate the peer certificate this option is used only if SSL_VERIFYPEER is true

buffersize

Instruct libcurl to use a smaller receive buffer

nosignal

Instruct libcurl to not use any signal/alarm handlers, even when using timeouts. This option is useful for multi-threaded applications. See libcurl-the-guide for more background information.

share

Provide a CURLShare for mutexing non-ts data

proxytype

indicates type of proxy. accepted values are CURLPROXY_HTTP (default), CURLPROXY_SOCKS4, CURLPROXY_SOCKS4A and CURLPROXY_SOCKS5.

encoding

Set the Accept-Encoding string. Use this to tell a server you would like the response to be compressed.

private_opt

Set pointer to private data

http200aliases

Set aliases for HTTP 200 in the HTTP Response header

unrestricted_auth

Continue to send authentication (user+password) when following locations, even when hostname changed. This can potentially send off the name and password to whatever host the server decides.

ftp_use_eprt

Specifically switch on or off the FTP engine's use of the EPRT command ( it also disables the LPRT attempt). By default, those ones will always be attempted before the good old traditional PORT command.

httpauth

Set this to a bitmask value to enable the particular authentications methods you like. Use this in combination with CURLOPT_USERPWD. Note that setting multiple bits may cause extra network round-trips.

ssl_ctx_function

Set the ssl context callback function, currently only for OpenSSL ssl_ctx in second argument. The function must be matching the curl_ssl_ctx_callback proto.

ssl_ctx_data

Set the userdata for the ssl context callback function's third argument

ftp_create_missing_dirs

FTP Option that causes missing dirs to be created on the remote server. In 7.19.4 we introduced the convenience enums for this option using the CURLFTP_CREATE_DIR prefix.

proxyauth

Set this to a bitmask value to enable the particular authentications methods you like. Use this in combination with CURLOPT_PROXYUSERPWD. Note that setting multiple bits may cause extra network round-trips.

ftp_response_timeout

FTP option that changes the timeout, in seconds, associated with getting a response. This is different from transfer timeout time and essentially places a demand on the FTP server to acknowledge commands in a timely manner.

ipresolve

Set this option to one of the CURL_IPRESOLVE_* defines (see below) to tell libcurl to resolve names to those IP versions only. This only has affect on systems with support for more than one, i.e IPv4 and_ IPv6.

maxfilesize

Set this option to limit the size of a file that will be downloaded from an HTTP or FTP server.

Note there is also LARGE version which adds large file support for platforms which have larger off_t sizes. See MAXFILESIZE_LARGE below.

infilesize_large

See the comment for INFILESIZE above, but in short, specifies the size of the file being uploaded. -1 means unknown.

resume_from_large

Sets the continuation offset. There is also a LONG version of this; look above for RESUME_FROM.

maxfilesize_large

Sets the maximum size of data that will be downloaded from an HTTP or FTP server. See MAXFILESIZE above for the LONG version.

netrc_file

Set this option to the file name of your .netrc file you want libcurl to parse (using the CURLOPT_NETRC option). If not set, libcurl will do a poor attempt to find the user's home directory and check for a .netrc file in there.

use_ssl

Enable SSL/TLS for FTP, pick one of: CURLFTPSSL_TRY - try using SSL, proceed anyway otherwise CURLFTPSSL_CONTROL - SSL for the control connection or fail CURLFTPSSL_ALL - SSL for all communication or fail

postfieldsize_large

The LARGE version of the standard POSTFIELDSIZE option

tcp_nodelay

Enable/disable the TCP Nagle algorithm

ftpsslauth

When FTP over SSL/TLS is selected (with CURLOPT_USE_SSL), this option can be used to change libcurl's default action which is to first try "AUTH SSL" and then "AUTH TLS" in this order, and proceed when a OK response has been received.

Available parameters are: CURLFTPAUTH_DEFAULT - let libcurl decide CURLFTPAUTH_SSL - try "AUTH SSL" first, then TLS CURLFTPAUTH_TLS - try "AUTH TLS" first, then SSL

ioctlfunction

ioctldata

ftp_account

zero terminated string for pass on to the FTP server when asked for "account" info

cookielist

feed cookies into cookie engine

ignore_content_length

ignore Content-Length

ftp_skip_pasv_ip

Set to non-zero to skip the IP address received in a 227 PASV FTP server response. Typically used for FTP-SSL purposes but is not restricted to that. libcurl will then instead use the same IP address it used for the control connection.

ftp_filemethod

Select "file method" to use when doing FTP, see the curl_ftpmethod above.

localport

Local port number to bind the socket to

localportrange

Number of ports to try, including the first one set with LOCALPORT. Thus, setting it to 1 will make no additional attempts but the first.

connect_only

no transfer, set up connection and let application use the socket by extracting it with CURLINFO_LASTSOCKET

conv_from_network_function

Function that will be called to convert from the network encoding (instead of using the iconv calls in libcurl)

conv_to_network_function

Function that will be called to convert to the network encoding (instead of using the iconv calls in libcurl)

conv_from_utf8_function

Function that will be called to convert from UTF8 (instead of using the iconv calls in libcurl) Note that this is used only for SSL certificate processing

max_send_speed_large

max_recv_speed_large

If the connection proceeds too quickly then need to slow it down

limit-rate: maximum number of bytes per second to send or receive

ftp_alternative_to_user

Pointer to command string to send if USER/PASS fails.

sockoptfunction

callback function for setting socket options

ssl_sessionid_cache

set to 0 to disable session ID re-use for this transfer, default is enabled (== 1)

ssh_auth_types

allowed SSH authentication methods

ssh_public_keyfile

Used by scp/sftp to do public/private key authentication

ftp_ssl_ccc

Send CCC (Clear Command Channel) after authentication

timeout_ms

Same as TIMEOUT and CONNECTTIMEOUT, but with ms resolution

http_transfer_decoding

http_content_decoding

set to zero to disable the libcurl's decoding and thus pass the raw body data to the application even when it is encoded/compressed

new_file_perms

new_directory_perms

Permission used when creating new files and directories on the remote server for protocols that support it, SFTP/SCP/FILE

postredir

Set the behaviour of POST when redirecting. Values must be set to one of CURL_REDIR* defines below. This used to be called CURLOPT_POST301

ssh_host_public_key_md5

used by scp/sftp to verify the host's public key

opensocketfunction

opensocketdata

Callback function for opening socket (instead of socket(2)). Optionally, callback is able change the address or refuse to connect returning CURL_SOCKET_BAD. The callback should have type curl_opensocket_callback

copypostfields

POST volatile input fields.

proxy_transfer_mode

set transfer mode (;type=<a|i>) when doing FTP via an HTTP proxy

seekfunction

seekdata

Callback function for seeking in the input stream

crlfile

CRL file

issuercert

Issuer certificate

address_scope

(IPv6) Address scope

certinfo

Collect certificate chain info and allow it to get retrievable with CURLINFO_CERTINFO after the transfer is complete. (Unfortunately) only working with OpenSSL-powered builds.

username

password

"name" and "pwd" to use when fetching.

proxyusername

proxypassword

"name" and "pwd" to use with Proxy when fetching.

noproxy

Comma separated list of hostnames defining no-proxy zones. These should match both hostnames directly, and hostnames within a domain. For example, local.com will match local.com and www.local.com, but NOT notlocal.com or www.notlocal.com. For compatibility with other implementations of this, .local.com will be considered to be the same as local.com. A single * is the only valid wildcard, and effectively disables the use of proxy.

tftp_blksize

block size for TFTP transfers

socks5_gssapi_service

Socks Service

socks5_gssapi_nec

Socks Service

protocols

set the bitmask for the protocols that are allowed to be used for the transfer, which thus helps the app which takes URLs from users or other external inputs and want to restrict what protocol(s) to deal with. Defaults to CURLPROTO_ALL.

redir_protocols

set the bitmask for the protocols that libcurl is allowed to follow to, as a subset of the CURLOPT_PROTOCOLS ones. That means the protocol needs to be set in both bitmasks to be allowed to get redirected to. Defaults to all protocols except FILE and SCP.

ssh_knownhosts

set the SSH knownhost file name to use

ssh_keyfunction

set the SSH host key callback, must point to a curl_sshkeycallback function

ssh_keydata

set the SSH host key callback custom pointer

mail_from

set the SMTP mail originator

mail_rcpt

set the SMTP mail receiver(s)

ftp_use_pret

FTP: send PRET before PASV

rtsp_request

RTSP request method (OPTIONS, SETUP, PLAY, etc...)

rtsp_session_id

The RTSP session identifier

rtsp_stream_uri

The RTSP stream URI

rtsp_transport

The Transport: header to use in RTSP requests

rtsp_client_cseq

Manually initialize the client RTSP CSeq for this handle

rtsp_server_cseq

Manually initialize the server RTSP CSeq for this handle

interleavedata

The stream to pass to INTERLEAVEFUNCTION.

interleavefunction

Let the application define a custom write method for RTP data

wildcardmatch

Turn on wildcard matching

chunk_bgn_function

Directory matching callback called before downloading of an individual file (chunk) started

chunk_end_function

Directory matching callback called after the file (chunk) was downloaded, or skipped

fnmatch_function

Change match (fnmatch-like) callback for wildcard matching

chunk_data

Let the application define custom chunk data pointer

fnmatch_data

FNMATCH_FUNCTION user pointer

resolve

send linked-list of name:port:address sets

tlsauth_username

Set a username for authenticated TLS

tlsauth_password

Set a password for authenticated TLS

tlsauth_type

Set authentication type for authenticated TLS

lastentry

the last unused

writedata

readdata

headerdata

rtspheader

convenient alias

alias CURLoption = int;

enum CurlOption CURLOPT_SERVER_RESPONSE_TIMEOUT;

enum CurlIpResolve: int;

Below here follows defines for the CURLOPT_IPRESOLVE option. If a host name resolves addresses using more than one IP protocol version, this option might be handy to force libcurl to use a specific IP version.

whatever

default, resolves addresses to all IP versions that your system allows

v4

resolve to ipv4 addresses

v6

resolve to ipv6 addresses

enum CurlOption CURLOPT_WRITEDATA;

enum CurlOption CURLOPT_READDATA;

enum CurlOption CURLOPT_HEADERDATA;

enum CurlOption CURLOPT_RTSPHEADER;

three convenient "aliases" that follow the name scheme better

enum CurlHttpVersion: int;

These enums are for use with the CURLOPT_HTTP_VERSION option.

none

setting this means we don't care, and that we'd like the library to choose the best possible for us!

v1_0

please use HTTP 1.0 in the request

v1_1

please use HTTP 1.1 in the request

last

*ILLEGAL* http version

enum CurlRtspReq: int;

Public API enums for RTSP requests

none

options

describe

announce

setup

play

pause

teardown

get_parameter

set_parameter

record

receive

last

enum CurlNetRcOption: int;

These enums are for use with the CURLOPT_NETRC option.

ignored

The .netrc will never be read. This is the default.

optional

A user:password in the URL will be preferred to one in the .netrc.

required

A user:password in the URL will be ignored. Unless one is set programmatically, the .netrc will be queried.

last

enum CurlSslVersion: int;

default_version

tlsv1

sslv2

sslv3

last

never use

enum CurlTlsAuth: int;

none

srp

last

never use

enum CurlRedir: int;

symbols to use with CURLOPT_POSTREDIR. CURL_REDIR_POST_301 and CURL_REDIR_POST_302 can be bitwise ORed so that CURL_REDIR_POST_301 | CURL_REDIR_POST_302 == CURL_REDIR_POST_ALL

get_all

post_301

post_302

post_all

enum CurlTimeCond: int;

none

ifmodsince

ifunmodsince

lastmod

last

alias curl_TimeCond = int;

int curl_strequal(in char* s1, in char* s2);

curl_strequal() and curl_strnequal() are subject for removal in a future libcurl, see lib/README.curlx for details

int curl_strnequal(in char* s1, in char* s2, size_t n);

ditto

curl_strequal() and curl_strnequal() are subject for removal in a future libcurl, see lib/README.curlx for details

struct curl_forms;

structure to be used as parameter for CURLFORM_ARRAY

CURLformoption option;

const(char)* value;

enum CurlFormAdd: int;

Use this for multipart formpost building

Returns code for curl_formadd()

Returns:

• CURL_FORMADD_OK on success
• CURL_FORMADD_MEMORY if the FormInfo allocation fails
• CURL_FORMADD_OPTION_TWICE if one option is given twice for one Form
• CURL_FORMADD_NULL if a null pointer was given for a char
• CURL_FORMADD_MEMORY if the allocation of a FormInfo struct failed
• CURL_FORMADD_UNKNOWN_OPTION if an unknown option was used
• CURL_FORMADD_INCOMPLETE if the some FormInfo is not complete (or error)
• CURL_FORMADD_MEMORY if a curl_httppost struct cannot be allocated
• CURL_FORMADD_MEMORY if some allocation for string copying failed.
• CURL_FORMADD_ILLEGAL_ARRAY if an illegal option is used in an array

ok

first, no error

memory

option_twice

null_ptr

unknown_option

incomplete

illegal_array

disabled

libcurl was built with this disabled

last

alias CURLFORMcode = int;

CURLFORMcode curl_formadd(curl_httppost** httppost, curl_httppost** last_post, ...);

Name: curl_formadd()

Description: Pretty advanced function for building multi-part formposts. Each invoke adds one part that together construct a full post. Then use CURLOPT_HTTPPOST to send it off to libcurl.

alias curl_formget_callback = extern (C) ulong function(void* arg, const(char*) buf, ulong len);

callback function for curl_formget() The void *arg pointer will be the one passed as second argument to curl_formget(). The character buffer passed to it must not be freed. Should return the buffer length passed to it as the argument "len" on success.

int curl_formget(curl_httppost* form, void* arg, curl_formget_callback append);

Name: curl_formget()

Description: Serialize a curl_httppost struct built with curl_formadd(). Accepts a void pointer as second argument which will be passed to the curl_formget_callback function. Returns 0 on success.

void curl_formfree(curl_httppost* form);

Name: curl_formfree()

Description: Free a multipart formpost previously built with curl_formadd().

char* curl_getenv(in char* variable);

Name: curl_getenv()

Description: Returns a malloc()'ed string that MUST be curl_free()ed after usage is complete. DEPRECATED - see lib/README.curlx

char* curl_version();

Name: curl_version()

Description: Returns a static ascii string of the libcurl version.

char* curl_easy_escape(CURL* handle, in char* string, int length);

Name: curl_easy_escape()

Description: Escapes URL strings (converts all letters consider illegal in URLs to their %XX versions). This function returns a new allocated string or NULL if an error occurred.

char* curl_escape(in char* string, int length);

the previous version:

char* curl_easy_unescape(CURL* handle, in char* string, int length, int* outlength);

Name: curl_easy_unescape()

Description: Unescapes URL encoding in strings (converts all %XX codes to their 8bit versions). This function returns a new allocated string or NULL if an error occurred. Conversion Note: On non-ASCII platforms the ASCII %XX codes are converted into the host encoding.

char* curl_unescape(in char* string, int length);

the previous version

void curl_free(void* p);

Name: curl_free()

Description: Provided for de-allocation in the same translation unit that did the allocation. Added in libcurl 7.10

CURLcode curl_global_init(c_long flags);

Name: curl_global_init()

Description: curl_global_init() should be invoked exactly once for each application that uses libcurl and before any call of other libcurl functions.

This function is not thread-safe!

CURLcode curl_global_init_mem(c_long flags, curl_malloc_callback m, curl_free_callback f, curl_realloc_callback r, curl_strdup_callback s, curl_calloc_callback c);

Name: curl_global_init_mem()

Description: curl_global_init() or curl_global_init_mem() should be invoked exactly once for each application that uses libcurl. This function can be used to initialize libcurl and set user defined memory management callback functions. Users can implement memory management routines to check for memory leaks, check for mis-use of the curl library etc. User registered callback routines with be invoked by this library instead of the system memory management routines like malloc, free etc.

void curl_global_cleanup();

Name: curl_global_cleanup()

Description: curl_global_cleanup() should be invoked exactly once for each application that uses libcurl

struct curl_slist;

linked-list structure for the CURLOPT_QUOTE option (and other)

curl_slist* curl_slist_append(curl_slist*, in char*);

Name: curl_slist_append()

Description: Appends a string to a linked list. If no list exists, it will be created first. Returns the new list, after appending.

linked-list structure for the CURLOPT_QUOTE option (and other)

void curl_slist_free_all(curl_slist*);

Name: curl_slist_free_all()

Description: free a previously built curl_slist.

linked-list structure for the CURLOPT_QUOTE option (and other)

time_t curl_getdate(char* p, time_t* unused);

Name: curl_getdate()

Description: Returns the time, in seconds since 1 Jan 1970 of the time string given in the first argument. The time argument in the second parameter is unused and should be set to NULL.

linked-list structure for the CURLOPT_QUOTE option (and other)

struct curl_certinfo;

info about the certificate chain, only for OpenSSL builds. Asked for with CURLOPT_CERTINFO / CURLINFO_CERTINFO

linked-list structure for the CURLOPT_QUOTE option (and other)

int num_of_certs;

number of certificates with information

curl_slist** certinfo;

for each index in this array, there's a linked list with textual information in the format "name: value"

enum int CURLINFO_STRING;

enum int CURLINFO_LONG;

enum int CURLINFO_DOUBLE;

enum int CURLINFO_SLIST;

enum int CURLINFO_MASK;

enum int CURLINFO_TYPEMASK;

enum CurlInfo: int;

none

effective_url

response_code

total_time

namelookup_time

connect_time

pretransfer_time

size_upload

size_download

speed_download

speed_upload

header_size

request_size

ssl_verifyresult

filetime

content_length_download

content_length_upload

starttransfer_time

content_type

redirect_time

redirect_count

private_info

http_connectcode

httpauth_avail

proxyauth_avail

os_errno

num_connects

ssl_engines

cookielist

lastsocket

ftp_entry_path

redirect_url

primary_ip

appconnect_time

certinfo

condition_unmet

rtsp_session_id

rtsp_client_cseq

rtsp_server_cseq

rtsp_cseq_recv

primary_port

local_ip

local_port

lastone

Fill in new entries below here!

alias CURLINFO = int;

enum CurlInfo CURLINFO_HTTP_CODE;

CURLINFO_RESPONSE_CODE is the new name for the option previously known as CURLINFO_HTTP_CODE

enum CurlClosePolicy: int;

none

oldest

least_recently_used

least_traffic

slowest

callback

last

alias curl_closepolicy = int;

enum CurlGlobal: int;

ssl

win32

all

nothing

default_

all

enum CurlLockData: int;

Setup defines, protos etc for the sharing stuff.

Different data locks for a single share

none

share

CURL_LOCK_DATA_SHARE is used internally to say that the locking is just made to change the internal state of the share itself.

cookie

dns

ssl_session

connect

last

alias curl_lock_data = int;

enum CurlLockAccess: int;

Different lock access types

none

unspecified action

shared_access

for read perhaps

single

for write perhaps

last

never use

alias curl_lock_access = int;

alias curl_lock_function = void function(void* handle, int data, int locktype, void* userptr);

alias curl_unlock_function = void function(void* handle, int data, void* userptr);

alias CURLSH = void;

enum CurlShError: int;

ok

all is fine

bad_option

1

in_use

2

invalid

3

nomem

out of memory

last

never use

alias CURLSHcode = int;

enum CurlShOption: int;

pass in a user data pointer used in the lock/unlock callback functions

none

don't use

share

specify a data type to share

unshare

specify which data type to stop sharing

lockfunc

pass in a 'curl_lock_function' pointer

unlockfunc

pass in a 'curl_unlock_function' pointer

userdata

pass in a user data pointer used in the lock/unlock callback functions

last

never use

alias CURLSHoption = int;

CURLSH* curl_share_init();

CURLSHcode curl_share_setopt(CURLSH*, CURLSHoption option, ...);

CURLSHcode curl_share_cleanup(CURLSH*);

enum CurlVer: int;

Structures for querying information about the curl library at runtime.

first

second

third

fourth

last

alias CURLversion = int;

enum CurlVer CURLVERSION_NOW;

The 'CURLVERSION_NOW' is the symbolic name meant to be used by basically all programs ever that want to get version information. It is meant to be a built-in version number for what kind of struct the caller expects. If the struct ever changes, we redefine the NOW to another enum from above.

struct _N28;

CURLversion age;

age of the returned struct

const(char)* version_;

LIBCURL_VERSION

uint version_num;

LIBCURL_VERSION_NUM

const(char)* host;

OS/host/cpu/machine when configured

int features;

bitmask, see defines below

const(char)* ssl_version;

human readable string

c_long ssl_version_num;

not used anymore, always 0

const(char)* libz_version;

human readable string

const(char)** protocols;

protocols is terminated by an entry with a NULL protoname

const(char)* ares;

The fields below this were added in CURLVERSION_SECOND

const(char)* libidn;

This field was added in CURLVERSION_THIRD

int iconv_ver_num;

These field were added in CURLVERSION_FOURTH.

Same as 'libiconv_version' if built with HAVE_ICONV

const(char)* libssh_version;

human readable string

alias curl_version_info_data = _N28;

enum CurlVersion: int;

ipv6

IPv6-enabled

kerberos4

kerberos auth is supported

ssl

SSL options are present

libz

libz features are present

ntlm

NTLM auth is supported

gssnegotiate

Negotiate auth support

dbg

built with debug capabilities

asynchdns

asynchronous dns resolves

spnego

SPNEGO auth

largefile

supports files bigger than 2GB

idn

International Domain Names support

sspi

SSPI is supported

conv

character conversions supported

curldebug

debug memory tracking supported

tlsauth_srp

TLS-SRP auth is supported

curl_version_info_data* curl_version_info(CURLversion);

Name: curl_version_info()

Description: This function returns a pointer to a static copy of the version info struct. See above.

const(char)* curl_easy_strerror(CURLcode);

Name: curl_easy_strerror()

Description: The curl_easy_strerror function may be used to turn a CURLcode value into the equivalent human readable error string. This is useful for printing meaningful error messages.

const(char)* curl_share_strerror(CURLSHcode);

Name: curl_share_strerror()

Description: The curl_share_strerror function may be used to turn a CURLSHcode value into the equivalent human readable error string. This is useful for printing meaningful error messages.

CURLcode curl_easy_pause(CURL* handle, int bitmask);

Name: curl_easy_pause()

Description: The curl_easy_pause function pauses or unpauses transfers. Select the new state by setting the bitmask, use the convenience defines below.

enum CurlPause: int;

recv

recv_cont

send

send_cont

all

cont

CURL* curl_easy_init();

CURLcode curl_easy_setopt(CURL* curl, CURLoption option, ...);

CURLcode curl_easy_perform(CURL* curl);

void curl_easy_cleanup(CURL* curl);

CURLcode curl_easy_getinfo(CURL* curl, CURLINFO info, ...);

Name: curl_easy_getinfo()

Description: Request internal information from the curl session with this function. The third argument MUST be a pointer to a long, a pointer to a char * or a pointer to a double (as the documentation describes elsewhere). The data pointed to will be filled in accordingly and can be relied upon only if the function returns CURLE_OK. This function is intended to get used *AFTER* a performed transfer, all results from this function are undefined until the transfer is completed.

CURL* curl_easy_duphandle(CURL* curl);

Name: curl_easy_duphandle()

Description: Creates a new curl session handle with the same options set for the handle passed in. Duplicating a handle could only be a matter of cloning data and options, internal state info and things like persistant connections cannot be transfered. It is useful in multithreaded applications when you can run curl_easy_duphandle() for each new thread to avoid a series of identical curl_easy_setopt() invokes in every thread.

void curl_easy_reset(CURL* curl);

Name: curl_easy_reset()

Description: Re-initializes a CURL handle to the default values. This puts back the handle to the same state as it was in when it was just created.

It does keep: live connections, the Session ID cache, the DNS cache and the cookies.

CURLcode curl_easy_recv(CURL* curl, void* buffer, size_t buflen, size_t* n);

Name: curl_easy_recv()

Description: Receives data from the connected socket. Use after successful curl_easy_perform() with CURLOPT_CONNECT_ONLY option.

CURLcode curl_easy_send(CURL* curl, void* buffer, size_t buflen, size_t* n);

Name: curl_easy_send()

Description: Sends data over the connected socket. Use after successful curl_easy_perform() with CURLOPT_CONNECT_ONLY option.

alias CURLM = void;

enum CurlM: int;

call_multi_perform

please call curl_multi_perform() or curl_multi_socket*() soon

ok

bad_handle

the passed-in handle is not a valid CURLM handle

bad_easy_handle

an easy handle was not good/valid

out_of_memory

if you ever get this, you're in deep sh*t

internal_error

this is a libcurl bug

bad_socket

the passed in socket argument did not match

unknown_option

curl_multi_setopt() with unsupported option

last

alias CURLMcode = int;

enum CurlM CURLM_CALL_MULTI_SOCKET;

just to make code nicer when using curl_multi_socket() you can now check for CURLM_CALL_MULTI_SOCKET too in the same style it works for curl_multi_perform() and CURLM_CALL_MULTI_PERFORM

enum CurlMsg: int;

none

done

This easy handle has completed. 'result' contains the CURLcode of the transfer

last

no used

alias CURLMSG = int;

union _N31;

void* whatever;

message-specific data

CURLcode result;

return code for transfer

struct CURLMsg;

CURLMSG msg;

what this message means

CURL* easy_handle;

the handle it concerns

_N31 data;

CURLM* curl_multi_init();

Name: curl_multi_init()

Desc: inititalize multi-style curl usage

Returns:

a new CURLM handle to use in all 'curl_multi' functions.

CURLMcode curl_multi_add_handle(CURLM* multi_handle, CURL* curl_handle);

Name: curl_multi_add_handle()

Desc: add a standard curl handle to the multi stack

Returns:

CURLMcode type, general multi error code.

CURLMcode curl_multi_remove_handle(CURLM* multi_handle, CURL* curl_handle);

Name: curl_multi_remove_handle()

Desc: removes a curl handle from the multi stack again

Returns:

CURLMcode type, general multi error code.

alias fd_set = int;

Name: curl_multi_fdset()

Desc: Ask curl for its fd_set sets. The app can use these to select() or poll() on. We want curl_multi_perform() called as soon as one of them are ready.

Returns:

CURLMcode type, general multi error code.

tmp decl

CURLMcode curl_multi_fdset(CURLM* multi_handle, fd_set* read_fd_set, fd_set* write_fd_set, fd_set* exc_fd_set, int* max_fd);

CURLMcode curl_multi_perform(CURLM* multi_handle, int* running_handles);

Name: curl_multi_perform()

Desc: When the app thinks there's data available for curl it calls this function to read/write whatever there is right now. This returns as soon as the reads and writes are done. This function does not require that there actually is data available for reading or that data can be written, it can be called just in case. It returns the number of handles that still transfer data in the second argument's integer-pointer.

Returns:

CURLMcode type, general multi error code. *NOTE* that this only returns errors etc regarding the whole multi stack. There might still have occurred problems on invidual transfers even when this returns OK.

CURLMcode curl_multi_cleanup(CURLM* multi_handle);

Name: curl_multi_cleanup()

Desc: Cleans up and removes a whole multi stack. It does not free or touch any individual easy handles in any way. We need to define in what state those handles will be if this function is called in the middle of a transfer.

Returns:

CURLMcode type, general multi error code.

CURLMsg* curl_multi_info_read(CURLM* multi_handle, int* msgs_in_queue);

Name: curl_multi_info_read()

Desc: Ask the multi handle if there's any messages/informationals from the individual transfers. Messages include informationals such as error code from the transfer or just the fact that a transfer is completed. More details on these should be written down as well.

Repeated calls to this function will return a new struct each time, until a special "end of msgs" struct is returned as a signal that there is no more to get at this point.

The data the returned pointer points to will not survive calling curl_multi_cleanup().

The 'CURLMsg' struct is meant to be very simple and only contain very basic informations. If more involved information is wanted, we will provide the particular "transfer handle" in that struct and that should/could/would be used in subsequent curl_easy_getinfo() calls (or similar). The point being that we must never expose complex structs to applications, as then we'll undoubtably get backwards compatibility problems in the future.

Returns:

A pointer to a filled-in struct, or NULL if it failed or ran out of structs. It also writes the number of messages left in the queue (after this read) in the integer the second argument points to.

const(char)* curl_multi_strerror(CURLMcode);

Name: curl_multi_strerror()

Desc: The curl_multi_strerror function may be used to turn a CURLMcode value into the equivalent human readable error string. This is useful for printing meaningful error messages.

Returns:

A pointer to a zero-terminated error message.

enum CurlPoll: int;

Name: curl_multi_socket() and curl_multi_socket_all()

Desc: An alternative version of curl_multi_perform() that allows the application to pass in one of the file descriptors that have been detected to have "action" on them and let libcurl perform. See man page for details.

none_

jdrewsen - underscored in order not to clash with reserved D symbols

in_

out_

inout_

remove_

alias CURL_SOCKET_TIMEOUT = CURL_SOCKET_BAD;

enum CurlCSelect: int;

in_

jdrewsen - underscored in order not to clash with reserved D symbols

out_

err_

alias curl_socket_callback = extern (C) int function(void* easy, socket_t s, int what, void* userp, void* socketp);

private socket pointer

alias curl_multi_timer_callback = extern (C) int function(void* multi, long timeout_ms, void* userp);

private callback pointer

Name: curl_multi_timer_callback

Desc: Called by libcurl whenever the library detects a change in the maximum number of milliseconds the app is allowed to wait before curl_multi_socket() or curl_multi_perform() must be called (to allow libcurl's timed events to take place).

Returns:

The callback should return zero.

CURLMcode curl_multi_socket(CURLM* multi_handle, curl_socket_t s, int* running_handles);

ditto

Name: curl_multi_timer_callback

Desc: Called by libcurl whenever the library detects a change in the maximum number of milliseconds the app is allowed to wait before curl_multi_socket() or curl_multi_perform() must be called (to allow libcurl's timed events to take place).

Returns:

The callback should return zero.

CURLMcode curl_multi_socket_action(CURLM* multi_handle, curl_socket_t s, int ev_bitmask, int* running_handles);

ditto

Name: curl_multi_timer_callback

Desc: Called by libcurl whenever the library detects a change in the maximum number of milliseconds the app is allowed to wait before curl_multi_socket() or curl_multi_perform() must be called (to allow libcurl's timed events to take place).

Returns:

The callback should return zero.

CURLMcode curl_multi_socket_all(CURLM* multi_handle, int* running_handles);

ditto

Name: curl_multi_timer_callback

Desc: Called by libcurl whenever the library detects a change in the maximum number of milliseconds the app is allowed to wait before curl_multi_socket() or curl_multi_perform() must be called (to allow libcurl's timed events to take place).

Returns:

The callback should return zero.

CURLMcode curl_multi_timeout(CURLM* multi_handle, c_long* milliseconds);

This macro below was added in 7.16.3 to push users who recompile to use the new curl_multi_socket_action() instead of the old curl_multi_socket()

Name: curl_multi_timeout()

Desc: Returns the maximum number of milliseconds the app is allowed to wait before curl_multi_socket() or curl_multi_perform() must be called (to allow libcurl's timed events to take place).

Returns:

CURLM error code.

enum CurlMOption: int;

socketfunction

This is the socket callback function pointer

socketdata

This is the argument passed to the socket callback

pipelining

set to 1 to enable pipelining for this multi handle

timerfunction

This is the timer callback function pointer

timerdata

This is the argument passed to the timer callback

maxconnects

maximum number of entries in the connection cache

lastentry

alias CURLMoption = int;

CURLMcode curl_multi_setopt(CURLM* multi_handle, CURLMoption option, ...);

Name: curl_multi_setopt()

Desc: Sets options for the multi handle.

Returns:

CURLM error code.

CURLMcode curl_multi_assign(CURLM* multi_handle, curl_socket_t sockfd, void* sockp);

Name: curl_multi_assign()

Desc: This function sets an association in the multi handle between the given socket and a private pointer of the application. This is (only) useful for curl_multi_socket uses.

Returns:

CURLM error code.